The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Changing a Bulb
WARNING:
Bulbs can become hot. Let the bulb cool down before removing it. Failure to do so could result in personal injury. |
Headlamp bulbs must be marked with an authorized D.O.T. marking for North America to make sure they have the proper lamp performance, light brightness, light pattern and safe visibility.
Install in the reverse order unless otherwise stated.
Headlamp Bulbs
- Switch all of the lamps and the ignition off.
- Remove the headlamp. See Removing a Headlamp.
- Release the clip and remove the bulb.
Note:
Do not touch the bulb glass.
Note:
If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used.
Front Clearance and Identification Lamp (If Equipped)
- Switch all of the lamps and the ignition off.
- Remove the screw and lens from the lamp assembly.
- Press the bulb in and turn the bulb counterclockwise to remove it.
Brake Lamp, Rear Lamp, Rear Direction Indicator, License Plate Lamp and Reverse Lamp
- Switch all of the lamps and the ignition off.
- Remove the four screws and the lamp lens from lamp assembly.
- Remove the bulb by pulling it straight out.
Thank You For Your Feedback