General Information
WARNING   WARNING:  The system does not relieve you of your responsibility to drive with due care and attention.
WARNING   WARNING:  At all times you are responsible for controlling your vehicle, supervising the system and intervening if required.
WARNING   WARNING:  Never look directly into the sensor with any type of object. There is a risk of eye injury.
WARNING   WARNING:  If the sensor becomes blocked the system may not function.
WARNING   WARNING:  To achieve full system performance, you must bed the braking system in.   See   Breaking-In
WARNING   WARNING:  The system performance may vary depending on your vehicle and road conditions.
WARNING   WARNING:  The system will not react to vehicles driving in a different direction.
WARNING   WARNING:  The system will not react to bicycles, motorcycles, people or animals.
WARNING   WARNING:  When the ignition is on the sensor will constantly transmit a laser beam.
WARNING   WARNING:  The system will not operate during harsh acceleration and steering.
WARNING   WARNING:  In cold and severe weather conditions the system may not function. Rain, snow, spray and ice can all influence the sensor.
WARNING   WARNING:  Do not carry out windshield repairs in the immediate area surrounding the sensor.
WARNING   WARNING:  If you install a windshield not approved by us, the system may not function correctly.
WARNING   WARNING:  If the engine stops after the system has been switched on, the hazard warning flashers will turn on.
WARNING   WARNING:  The system may not function when driving around sharp curves.

Note:   Keep the windshield free from obstructions such as bird droppings, insects, snow or ice.
Note:   Keep the hood free of ice and snow, otherwise the system may not function correctly.
A sensor is mounted behind the interior rear view mirror. It continuously monitors conditions to decide when to intervene.
The system is designed to help you reduce low speed collisions into the rear of another vehicle. It will also help you reduce the impact damage or potentially avoid the collision completely.
The system operates at speeds below approximately 19 mph (30 km/h) by applying the brakes when the sensor detects that a collision is likely.
You must depress the brake pedal to obtain full braking force.
When the system is braking or has automatically applied the brakes, a message will be shown in the information display.
Using Active City Stop
Switching the System Off and On
Note:   The system automatically turns on every time you switch the ignition on.
In certain situations it is advisable to disable the system, for example:
  • Driving off road when objects may cover the windshield.
  • Driving through a car wash facility.
You can switch the system off and on using the information display.   See   General Information
Active City Stop Relearning Procedure
Note:   When you disconnect the battery, the system will go through a relearning procedure. During this time the system will not be available.
You must drive your vehicle above 31mph (50 km/h) in a straight line for the procedure to complete. This procedure may take several minutes.
Laser Sensor Information
Image Shown Without Description
WARNING   WARNING:  Invisible laser radiation. Do not view directly with optical instruments (magnifiers). Class 1M laser product.
WARNING   WARNING:  IEC 60825-1: 1993 + A2:2001. Complies with FDA performance standards for laser products except for deviation pursuant to Laser Notice No. 50, dated July 26th, 2001.


Item   Specification  
Max average power   45mW  
Pulse duration   33ns  
Wavelength   905nm  

Owner's Manual Feedback

  • Please note that Ford will not respond to individual feedback.
  • Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
  • Your feedback will be investigated and any necessary changes will be updated in the online Owner's Manual. 

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

Ok