This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Electromagnetic Compatibility
WARNING:
Your vehicle has been tested and certified to legislations relating to electromagnetic compatibility (72/245/EEC, UN ECE Regulation 10 or other applicable local requirements). It is your responsibility to make sure that any equipment you have fitted complies with applicable local legislations. Have any equipment fitted by an authorized dealer.
WARNING:
The radio frequency transmitter equipment (e.g. cellular telephones, amateur radio transmitters etc.) may only be fitted to your vehicle if they keep to the parameters shown in the table below. There are no special provisions or conditions for installations or use.
WARNING:
Do not mount any transceiver, microphones, speakers, or any other item in the deployment path of the airbag system.
WARNING:
Do not fasten antenna cables to original vehicle wiring, fuel pipes and brake pipes.
WARNING:
Keep antenna and power cables at least 4 inches (10 centimeters) from any electronic modules and airbags. |
| Frequency Band MHz | Maximum output power Watt (Peak RMS) | Antenna Positions |
|---|---|---|
| 1 – 30 | 50 W | 3 |
| 31 – 54 | 50 W | 1, 2 |
| 68 – 87.5 | 50 W | 1, 2 |
| 142 – 176 | 50 W | 1, 2 |
| 380 – 512 | 50 W | 1, 2 |
| 806 – 940 | 10 W | 1, 2 |
| 1200 – 1400 | 10 W | 1, 2 |
| 1710 – 1885 | 10 W | 1, 2 |
| 1885 – 2025 | 10 W | 1, 2 |
Note:
After the installation of radio frequency transmitters, check for disturbances from and to all electrical equipment in your vehicle, both in the standby and transmit modes.
Check all electrical equipment:- with the ignition ON
- with the engine running
- during a road test at various speeds.
Check that electromagnetic fields generated inside your vehicle cabin by the transmitter installed do not exceed applicable human exposure requirements.
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.