WARNING:
Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury.
WARNING:
Make sure the bulbs have cooled down before removing them. Failure to follow this warning could result in serious personal injury. |
Note:
Only fit bulbs of the correct specification.
Note:
The following instructions describe how to remove the bulbs. Fit replacements in the reverse order unless otherwise stated.
Headlamp
AHeadlamp low beam. BHeadlamp high beam and side lamp CFront direction indicator.
|
Note:
Remove the covers to gain access to the bulbs.
Headlamp Low Beam
- Remove the headlamp. See
Removing a Headlamp.
- Carefully remove the cover.
- Disconnect the electrical connector.
- Release the clip and remove the bulb.
Note:
Do not touch the glass of the bulb.
Headlamp High Beam
- Remove the headlamp. See
Removing a Headlamp.
- Carefully remove the cover.
- Turn the bulb counterclockwise and remove it.
Note:
Do not touch the glass of the bulb.
Front Side Lamp
- Remove the headlamp. See
Removing a Headlamp.
- Carefully remove the cover.
- Remove the bulb holder.
- Remove the bulb.
Direction Indicator
- Remove the headlamp. See
Removing a Headlamp.
- Turn the bulb holder counterclockwise and remove it.
- Gently press the bulb into the bulb holder, turn it counterclockwise and remove it.
Daytime Running Lamps
Note:
This is not a serviceable item, see an authorized dealer if it fails.
Side Repeater
- Press the side of the cover to release the clips.
- Carefully remove the cover.
- Remove the bulb holder. Remove the bulb.
Approach Lamps (If Equipped)
Note:
This is not a serviceable item, see an authorized dealer if it fails.
Front Fog Lamps
- Remove the retaining clips to gain access to the lamp assembly.
Note:
You cannot separate the fog lamp bulb from the bulb holder.
- Use a suitable tool, for example a screwdriver, to carefully remove the housing cover.
- Remove the screws.
- Remove the lamp.
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
LED Lamps
LED lamps are not serviceable items. See an authorized dealer if they fail.
The following lamps are LED:
Rear Lamps
- Remove the screws.
- Lift up the luggage compartment seal.
- Remove the carpet.
- Remove the wing nut.
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
- Gently press the bulb into the bulb holder, turn it counterclockwise and remove it.
- Direction indicator.
- Brake.
- Reverse.
Central High Mounted Brake Lamp
Note:
This is not a serviceable item, see an authorized dealer if it fails.
License Plate Lamp
- Carefully release the spring clip.
- Remove the lamp.
- Remove the bulb.
Interior Lamps
Note:
Do not remove the lamp lens.
- Use a suitable tool, for example a screwdriver, to carefully remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb.
Reading Lamps
Note:
Do not remove the lamp lens.
- Use a suitable tool, for example a screwdriver, to carefully remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb.
Luggage Compartment Lamp, Footwell Lamp and Liftgate Lamp
- Use a suitable tool, for example a screwdriver, to carefully remove the lamp.
- Remove the bulb.