This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Capacities and Specifications - 1.0L EcoBoost™
WARNING:
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. |
Capacities
| Item | Quantity |
|---|---|
| Engine oil fill capacity including the oil filter. | 1.2 gal (4.6 L) |
| Engine oil fill capacity excluding the oil filter. | 1.2 gal (4.4 L) |
| Engine coolant fill capacity. | 2.2 gal (8.5 L) |
| Manual transmission fluid fill capacity. | 0.4 gal (1.67 L) |
| Automatic transmission fluid fill capacity. | 2.3 gal (8.6 L) |
| Fuel tank fill capacity. | 12.4 gal (47 L) |
| Washer system fill capacity. | 0.7 gal (2.5 L) |
| Air conditioning refrigerant fill capacity. | 20.8 oz (0.59 kg) |
| Air conditioning refrigerant compressor oil fill capacity. | 7.0 fl oz (207 ml) |
Adding Engine Oil
| Quantity |
|---|
| 0.7 qt (0.7 L) |
The quantity of engine oil required to raise the indicated level on the dipstick from minimum to maximum.
Specifications
We recommend that you use Motorcraft oil and fluids for your vehicle. Only use fluid that meets Ford specifications.
Using other fluids could result in damage not covered by the vehicle Warranty.
Materials
| Name | Specification |
|---|---|
| Engine Oil - SAE 5W-20 - Synthetic Blend | WSS-M2C945-A |
| Engine Oil - SAE 5W-20 - Full Synthetic | WSS-M2C945-A |
| Antifreeze | WSS-M97B44-D2 |
| Brake Fluid | WSS-M6C65-A2 |
| Manual Transmission Fluid - SAE 75W | WSS-M2C200-D2 |
| Automatic Transmission Fluid | WSS-M2C938-A |
| Windshield Washer Fluid | WSS-M14P19-A |
| Refrigerant - R-1234yf | WSS-M17B21-A |
| Refrigerant Oil | WSS-M2C300-A2 |
| Multi-Purpose Grease | ESB-M1C93-B |
| Penetrating Fluid | - |
Motor oils of the recommended viscosity grade that display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.
Note:
Automatic transmissions that require MERCON® LV transmission fluid should only use MERCON® LV transmission fluid.
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricants Specification Advisory Committee (ILSAC).
Note:
Do not use more than
1.1 qt (1 L) of the alternative engine oil between scheduled service intervals.
Using oil and fluids that do not meet the defined specification and viscosity grade may lead to:- Component damage which may not be covered by the vehicle Warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by the vehicle Warranty.
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil where the ambient temperature reaches
-22 °F (-30 °C) or below.
Materials
| Name | Specification |
|---|---|
| Engine Oil - SAE 0W-20 | WSS-M2C947-A |