This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
High Voltage Battery Cut-Off Switch
The high voltage shut off operation shuts off power from the high-voltage battery after a collision, or if your vehicle receives a substantial physical jolt.
To reactivate your vehicle after either event, perform the following steps:
- Press the START/STOP button to power off your vehicle.
- Wait for your vehicle to fully shut down and the instrument cluster to turn off.
Note:
Your vehicle may take between 30 to 90 seconds to shut down.
- Press the brake pedal and press the START/STOP button.
- If your vehicle is not powered after this sequence, repeat steps 1 through 3 up to two more times.
Note:
During this process, your vehicle detects if the electrical system is safe and reactivates. Once your vehicle determines the electrical system safe, you can start your vehicle as you would normally by pressing the brake in combination with the START/STOP button.
Note:
In the event your vehicle does not reactivate after the third power cycle, contact an authorized dealer.
Thank You For Your Feedback