This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Cleaning the Exterior
Your vehicle has heat exchangers integrated with the front fascia designed to maximize performance.
Do not apply a high-pressure washer directly to the heat exchangers as damage to the cooling fins could occur.
Cleaning Vehicle Wrap (If Equipped)
Do not wash your vehicle for the first six weeks after the application of the wrap.
To prevent water from getting under the wrap, contact an authorized dealer to repair any damage caused by stone chips as soon as possible.
Do not use a hot wax treatment if you use a car wash facility.
Note:
Car wash brushes could damage the wrap.
Note:
Bubbles could appear under the wrap for a few weeks after the first application and also during high outside temperatures. These normally disappear after a short period of time. If these do not, please contact an authorized dealer.
Precautions for High-Pressure Wash
- Do not use water pressure higher than 1,200 psi (80 bar).
- Do not use water hotter than 140 °F (60 °C).
- Keep the nozzle at a minimum distance of 12 in (30 cm) and minimum angle of 30 ° to your vehicle's surface.
Thank You For Your Feedback