This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Creating a MyKey
Use the information display to create a MyKey.
To create a MyKey: - Place your key into the ignition or, if your vehicle is equipped with keyless start, place your transmitter into the backup position. Details on the backup position's location are in another chapter. See Passive Anti-Theft System.
- Switch the ignition on.
- Access the main menu using your left-hand-side steering wheel controls.
- Depending on your display options, select either Settings or Advanced Settings, then MyKey and finally Create MyKey.
- When the menu reads Hold OK to Create MyKey, press and hold the OK button to program a MyKey.
- The display then prompts you to program the Configurable settings.
You can program the configurable features now or at any time. You can advance through the settings without programming them by pressing the OK button. MyKey then keeps all of the default settings.
When you finish programming your MyKey, the Type 3 information display adds a confirmation screen, New MyKey Has Been Created. The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter.
Programming/Changing Configurable Settings
Use the information display to program or change your configurable MyKey settings. - Place your admin key into the ignition or, if your vehicle is equipped with keyless start, place your admin transmitter into the backup position. Details on the backup position's location are in another chapter. See Passive Anti-Theft System.
- Depending on your display options, select either Settings or Advanced Settings, then MyKey and finally to various configurable features.
- Scroll down through the choices, and then highlight the feature you want to configure.
Note:
You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey.Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings.
The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter.
Thank You For Your Feedback