This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Power Windows
WARNING:
Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves.
WARNING:
When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings. |
Press the control to open the window.
Lift the control to close the window.
Note:
You may hear a pulsing noise when just one of the windows is open. Lower the opposite window slightly to reduce this noise.
One-Touch Up or Down (If Equipped)
Press or lift the switch fully and release it. Press or lift it again to stop the window.
Note:
The window may disable for up to five minutes if you cycle it up and down repeatedly. This helps prevent damage to the motor. Normal operation will resume once the motor cools.
Restoring the One-Touch Up Function
You may lose the one-touch function if the vehicle battery is low.
To reset the function after the battery recharges:
- Pull the switch all the way up.
- Hold the switch until the glass stops and continue to hold for two seconds.
- Press the switch down and operate the window to the full down position. One-touch up will now be functional.
Note:
Perform one-touch up re-calibration with the door closed. Calibrating with the door open will cause the window to continuously bounce back.
Bounce-Back (If Equipped)
The window will automatically stop and reverse some distance if it detects an obstacle while closing.
Overriding the Bounce-Back Feature
|
WARNING:
When you override the bounce-back feature the window will not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle. |
Pull up the window switch and hold within two seconds of the window reaching the bounce-back position. The window will travel up with no bounce-back protection. The window will stop if you release the switch before the window closes fully.
Window Lock (If Equipped)
Press the control to lock or unlock the rear window controls.
Accessory Delay (If Equipped)
The window switches remain operational for several minutes when you switch the ignition off or until you open either front door.
Thank You For Your Feedback