This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Passive Anti-Theft System
Note:
The system is not compatible with non-Ford aftermarket remote start systems.Use of these systems may result in vehicle starting problems and a loss of security protection.
Note:
Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting problems if they are too close to the key when starting the engine. Prevent these objects from touching the coded key while starting the engine. Switch the ignition off, move all objects on the key chain away from the coded key and restart the engine if a problem occurs.
Note:
Do not leave a duplicate coded key in the vehicle. Always take your keys and lock all doors when leaving the vehicle.
SecuriLock™
The system is an engine immobilization system.It helps prevent the engine from starting unless you use a coded key programmed to your vehicle.Using the wrong key may prevent the engine from starting. A message may appear in the information display.
If you are unable to start the engine with a correctly coded key, the system has malfunctioned. A message may appear in the information display.
Automatic Arming
The system arms immediately after you switch the ignition off.
Automatic Disarming
Switching the ignition on with a coded key disarms the system.
Replacement Keys
Note:
Your vehicle may have two integrated keyhead transmitters.
The integrated keyhead transmitter functions as a programmed ignition key. It operates all the locks, starts the vehicle and acts as a remote control.
If your programmed transmitters or standard SecuriLock coded keys are lost or stolen and you do not have an extra coded key, you need to have your vehicle towed to an authorized dealer. You need to erase the key codes from your vehicle and program new coded keys.
Store an extra programmed key away from your vehicle in a safe place to help prevent any inconveniences. Contact an authorized dealer to purchase additional spare or replacement keys.
Programming a Spare Integrated Keyhead Transmitter
Note:
You can program a maximum of six coded keys to your vehicle. All six can be integrated keyhead transmitters.
You can program your own integrated keyhead transmitter or standard SecuriLock coded keys to your vehicle.This procedure programs both the engine immobilizer keycode and the remote entry portion of the remote control to your vehicle.
Only use integrated keyhead transmitters or standard SecuriLock keys.
You must have two previously programmed coded keys and the new unprogrammed key readily accessible.Contact an authorized dealer to have the spare key programmed if two previously programmed coded keys are not available.
Read and understand the entire procedure before you begin.
- Insert the first previously programmed coded key into the ignition.
- Switch the ignition from off to on.Keep the ignition on for at least three seconds, but no more than 10 seconds.
- Switch the ignition off and remove the first coded key from the ignition.
- After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
- Switch the ignition from off to on.Keep the ignition on for at least three seconds, but no more than 10 seconds.
- Switch the ignition off and remove the second previously programmed coded key from the ignition.
- After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.
- Switch the ignition from off to on.Keep the ignition on for at least six seconds until you hear the door locks cycle.
- Remove the newly programmed coded key from the ignition.
The key starts the engine if programming is successful. You can operate the remote entry system if the new key is an integrated keyhead transmitter.
If programming was not successful, wait 20 seconds and repeat Steps 1 through 8. If you are still unsuccessful, take your vehicle to an authorized dealer.
Programming a Spare Intelligent Access Key
Note:
You can program a maximum of four intelligent access keys to your vehicle.
Note:
If your programmed transmitters are lost or stolen and you do not have an extra coded key, you need to have your vehicle towed to an authorized dealer. You need to erase the key codes from your vehicle and program new coded keys. Store an extra programmed key away from your vehicle in a safe place to help prevent any inconvenience. Contact an authorized dealer to purchase additional spare or replacement keys.
You must have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. Contact an authorized dealer to have the spare key programmed if two previously programmed keys are not available.Make sure that your vehicle is off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure.Perform all steps within 30 seconds of starting the sequence.Stop and wait for at least one minute before starting again if you perform any steps out of sequence.
Read and understand the entire procedure before you begin.
Type One
Type Two
- Place the first programmed key in the backup slot (A) at the bottom of the cup holder or inside the center console (A), then press the push button ignition switch.
- Wait five seconds and then press the push button ignition switch again.
- Remove the intelligent access key.
- Within 10 seconds, place a second programmed intelligent access key in the backup slot.Press the push button ignition switch.
- Wait five seconds and then press the push button ignition switch again.Keep the ignition on for at least three seconds, but no more than 10 seconds.
- Remove the intelligent access key.
- Place the unprogrammed intelligent access key in the backup slot and press the push button ignition switch.
Programming is now complete.Verify the remote control functions operate and your vehicle starts with the new intelligent access key.
If programming was not successful, wait 10 seconds and repeat Steps 1 through 7. If you are still unsuccessful, take your vehicle to an authorized dealer.
Thank You For Your Feedback