This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Changing the Engine Air Filter - Diesel
WARNING:
To reduce the risk of vehicle damage and personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. |
Use the correct specification air filter element. See
Motorcraft Parts - 3.0L Power Stroke Diesel, 3.0L Diesel, Argentina/Canada/United States of America, Vehicles Built From: 16-09-2019
.
Note:
Failure to use the correct air filter element may result in severe engine damage.Resulting component damage may not be covered by the vehicle Warranty.
Change the air filter element at the correct service interval. See
Scheduled Maintenance.
- Remove the clips that secure the air filter housing cover.Lift and rotate the air filter housing cover.
- Remove the air filter element from the air filter housing.
- To install, reverse the removal procedure.
- After installing a new air filter element, reset the air filter restriction gauge by pressing the reset button.
Air Filter Restriction Gauge
The air filter restriction gauge is in the upper housing of the air filter assembly.
Check the air filter restriction gauge whenever you open the hood to carry out general engine maintenance or at least every
7,500 mi (12,000 km). If you operate your vehicle in extremely dusty conditions, check the gauge at least every
500 mi (800 km) or two weeks, whichever occurs first. Change the air filter element when the restriction gauge reads near the change filter line and the gauge is yellow. Allowing the restriction gauge to reach maximum affects engine performance and fuel economy.
Operating your vehicle in heavy snowfall or extreme rain conditions may allow excessive amounts of snow or water into the air intake system. This could restrict air flow and cause the engine to lose power or shut down.
After installing a new air filter element, reset the gauge by pressing the reset button.
After operating your vehicle during heavy snowfall or extreme rain, do the following:- Snow: At the earliest opportunity, open the hood and clear any snow and ice from the air filter housing inlet and reset the air filter restriction gauge.
- Extreme rain: The air filter element dries out after approximately 15–30 minutes of driving at highway speeds. At the earliest opportunity, open the hood and reset the air filter restriction gauge.
Thank You For Your Feedback