This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Changing a Bulb
WARNING:
Make sure the bulbs have cooled down before removing them. Failure to follow this warning could result in serious personal injury. |
Note:
Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
Note:
If the bulb is accidentally touched, clean it with rubbing alcohol before installing it.
Accessing the Halogen High Beam, Low Beam and Direction Indicator Bulbs
- Rotate the steering wheel to the opposite side of the bulb needing replacement.
- Remove two screws and one push pin from the front of the wheel liner.
- Pull the wheel liner back towards the tire to gain access to the bulbs.
Replacing the Halogen High Beam, Low Beam and Direction Indicator Bulbs
A. Low beam headlamp bulb.B. Direction indicator bulb.C. High beam headlamp bulb. |
- Make sure the headlamps are off.
- For the high beam and low beam bulbs, remove the rubber cap to access the bulbs.
- Remove the bulb holder from the lamp assembly by turning it counterclockwise and pulling it straight out.
- Disconnect the bulb from the electrical connector.
- Install the new bulb in reverse order.
Replacing Side Marker Bulb
- Make sure the headlamps are off.
- With the hood open, locate the side marker on the top of the headlamp assembly.
- Remove the bulb holder from the lamp assembly by turning it counterclockwise and pulling it straight out.
- Install the new bulb in reverse order.
Replacing Fog Lamp Bulbs (If Equipped)
- Make sure the fog lamps are off.
- Disconnect the electrical connector from the fog lamp bulb.
- Turn the bulb counterclockwise and remove it from the fog lamp.
- Install the new bulb in reverse order.
Replacing LED Headlamp Bulbs (If Equipped)
These lamps have LED bulbs. Contact an authorized dealer.
Replacing LED Fog lamp Bulbs (If Equipped)
These lamps have LED bulbs. Contact an authorized dealer.
Replacing LED Direction Indicator and Side Marker Bulbs (If Equipped)
These lamps have LED bulbs. Contact an authorized dealer.
Replacing Brake, Rear, Direction Indicator and Reverse Lamp Bulbs
- Make sure the headlamps are off.
- Open the tailgate to access the rear lamp assemblies
- Remove the two bolts from the tail lamp assembly. Then, carefully pull the lamp assembly from the tailgate pillar by releasing the two retaining tabs.
- Disconnect the electrical connector from the bulb.
| A. Brake, rear and direction indicator bulb. B. Reverse lamp bulb. |
- Rotate the bulb socket counterclockwise and remove it from the rear lamp assembly.
- Install the new bulb in reverse order.
Replacing LED Brake, Rear, Direction Indicator and Reverse Lamp Bulbs (If Equipped)
These lamps have LED bulbs. Contact an authorized dealer.
Replacing Cargo Lamp and High-mount Brake Lamp Bulbs
- Make sure the lamps are off.
- Remove the four screws and move the lamp assembly away from the vehicle to expose the bulb sockets.
- Remove the bulb socket by rotating it counterclockwise and pulling it out of the lamp assembly.
- Pull the bulb straight out of the socket.
- Install the new bulb in reverse order.
Replacing LED Cargo Lamp, Spot Lamp and High-mount Brake Lamp Bulbs (If Equipped)
These lamps have LED bulbs. Contact an authorized dealer.
Replacing the License Plate Lamp Bulb
Note:
The license plate bulbs are behind the rear bumper.
- Reach behind the rear bumper to locate the bulb.
- Twist the bulb socket counterclockwise and carefully pull to remove it from the lamp assembly.
- Pull the bulb straight out of the socket.
- Install the new bulb in reverse order.
Replacing Exterior Mounted Mirror Direction Indicator Lamp Bulbs
These lamps have LED bulbs. Contact an authorized dealer.
Thank You For Your Feedback