This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Using Cruise Control (If Equipped)
The indicator appears in the information display.
WARNING:
Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
WARNING:
When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes. |
Note:
Cruise control disengages if the vehicle speed decreases more than
10 mph (16 km/h) below the set speed when driving uphill.
To help the system to maintain the set speed when going downhill, downshift to a lower gear.
The cruise controls are on the steering wheel.
Switching Cruise Control On
Press ON.
The indicator appears in the information display.Setting the Cruise Speed
- Drive to desired speed.
- Press SET+ or SET-.
- Take your foot off the accelerator pedal.
Note:
The indicator changes color.
Changing the Set Speed
Note:
If you accelerate by pressing the accelerator pedal, the set speed will not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
- Press SET+ or SET- to change the set speed in small increments.
- Press the accelerator or brake pedal until you reach the desired speed. Press SET+ or SET-.
- Press and hold SET+ or SET-. Release the control when you reach the desired speed.
Canceling the Set Speed
Press CNCL or tap the brake pedal. The set speed does not erase.
Resuming the Set Speed
Press RES.
Switching Cruise Control Off
Note:
You erase the set speed when you switch the system off.
Press OFF when the system is in stand by mode, or switch the ignition off.
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.