This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Memory Function
This feature automatically recalls the position of the following:
WARNING:
Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts.
WARNING:
Do not use the memory function when your vehicle is moving. |
This feature automatically recalls the position of the following:
- Driver seat.
- Power mirrors.
- Optional power steering column.
- Optional power adjustable foot pedals.
The memory control is on the driver door.
Saving a PreSet Position
- Switch the ignition on.
- Adjust the memory features to your desired position.
- Press and hold the desired preset button until you hear a single tone.
You can save up to two preset memory positions. You can save a memory preset at any time.
Recalling a PreSet Position
Press and release the preset button associated with your desired driving position. The memory features move to the position stored for that preset.
You can recall a programmed memory position:- Only in park (P) or neutral (N) if the ignition is on.
- In any gearshift position if the ignition is not on.
- Pressing your remote control transmitter unlock button (if the remote control is programmed to a memory position).
- Unlocking your vehicle with an intelligent access key (if it is programmed to a memory position).
Note:
Using a linked keyfob to recall your memory position when the ignition is off moves the seat to the Easy Entry position.
Note:
Adjusting any active memory feature or pressing a memory switch during a memory recall cancels the operation.
Linking a PreSet Position to your Remote Control or Intelligent Access Key Fob
Your vehicle can save the preset memory positions for up to two remote controls.
- With the ignition on, move the memory features to the desired positions.
- Press and hold the desired preset button for about five seconds. A tone sounds after about two seconds. Continue holding until you hear a second tone.
- Within three seconds, press the lock button on the remote control you are linking.
To unlink a remote control, follow the same procedure – except in step 3, press the unlock button on the remote control.
Note:
If more than one linked remote control or intelligent access key is in range, the memory function moves to the settings of the first key to initiate a memory recall.
Easy Entry and Exit Feature
This feature adjusts the position of the seat and steering column to allow easier exit and entry to the vehicle.
The driver seat automatically moves
2 in (5 cm) rearward when the transmission is in park (P) and you remove the key from the ignition or you switch the ignition off.
The driver seat and steering wheel return to their previous positions when you put the key in the ignition or switch the ignition on.
You can enable or disable this feature through the information display. See
Information Displays.
Thank You For Your Feedback