Note:
Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may display abbreviated or shortened depending upon which cluster type you have.
Press the OK button to acknowledge and remove some messages from the information display. Other messages delete automatically after a short time.
You need to confirm certain messages before you can access the menus.
4WD
Message
| Action
|
---|
4WD Temporarily Disabled
| The four wheel drive system has automatically disabled itself due to the system overheating.
|
4WD Off
| The four wheel drive system has automatically disabled itself due to the system overheating or you are using the spare tire.
|
4WD Restored
| The four wheel drive system resumes normal function and clears this message after driving a short distance with the road tire re-installed or after the system cools.
|
4WD Malfunction Service Required
| The four wheel drive system is not operating properly and the powertrain fault indicator illuminates. See
Warning Lamps and Indicators.
If the warning stays illuminated or continues to illuminate, contact an authorized dealer as soon as possible.
|
Change 4WD Power Transfer Unit Lube
| Displayed when the transfer case fluid requires service.
|
4WD Power Transfer Unit Lube Set to New
| Displayed when the transfer case fluid has been changed and reset to new.
|
Adaptive Cruise Control
Message
| Action
|
---|
Adaptive Cruise Malfunction
| A radar malfunction is preventing the adaptive cruise from engaging. See
Using Adaptive Cruise Control.
|
Adaptive Cruise Not Available
| Conditions exist such that the adaptive cruise cannot function properly. See
Using Adaptive Cruise Control.
|
Adaptive Cruise Not Available Sensor Blocked See Manual
| The radar is blocked because of poor radar visibility due to bad weather or ice/mud/water in front of radar. Driver can typically clean the sensor to resolve. See
Using Adaptive Cruise Control.
|
AdvanceTrac™
Message
| Action
|
---|
Service AdvanceTrac
| The system detects a malfunction due to a blocked sensor.
|
AdvanceTrac Off On
| The driver has disabled or enabled the traction control.
|
Alarm
Message
| Action
|
---|
Vehicle Alarm To Stop Alarm, Start Vehicle
| Unauthorized entry triggered the alarm. See
Anti-Theft Alarm.
|
Automatic Engine Shutdown
Message
| Action
|
---|
Engine Shuts Off In XX Seconds
| The engine is preparing to shutdown.
|
Engine Shut Off For Fuel Economy
| The engine has shutdown to help increase fuel economy.
|
Engine Shuts Off in XX Seconds Press OK to Override
| The engine is preparing to shutdown. You can press OK on the left steering wheel button to override the shutdown.
|
Automatic High Beam Control
Message
| Action
|
---|
Front Camera Low Visibility Clean Screen
| The front camera sensor has reduced visibility.Clean the windshield.
|
Front Camera Malfunction Service Required
| The system requires service due to a malfunction. Contact an authorized dealer.
|
Front Camera Temporarily Not Available
| The front camera sensor has malfunctioned.Wait a short period of time for the sensor to cool down.
|
Battery and Charging System
Message
| Action
|
---|
Check Charging System
| The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.
|
Low Battery Features Temporarily Turned Off
| The battery management system detects an extended low voltage condition. Your vehicle will disable various features to help preserve the battery. Turn off as many of the electrical loads as soon as possible to improve the system voltage. Once the system voltage recovers, the disabled features will operate as normal.
|
Turn Power Off to Save Battery
| The battery management system determines that the battery is at a low state of charge. Switch the ignition off as soon as possible to protect the battery. This message clears once you start the vehicle and the battery state of charge has recovered. Turning off unnecessary electrical loads allows faster battery state-of-charge recovery.
|
Blind Spot Information and Cross Traffic Alert System
Message
| Action
|
---|
Blindspot System Fault
| A fault with the system has occurred. Contact an authorized dealer as soon as possible.
|
Blindspot Not Available Sensor Blocked See Manual
| The system sensors are blocked. Contact an authorized dealer as soon as possible. See
Blind Spot Information System.
|
Vehicle Coming From X
| The system detects a vehicle. See
Blind Spot Information System.
|
Cross Traffic Not Available Sensor Blocked
| The blind spot information system and cross traffic alert system sensors are blocked.See
Blind Spot Information System.
|
Cross Traffic System Fault
| A fault with the system has occurred. Contact an authorized dealer as soon as possible.
|
Brake System
Message
| Action
|
---|
Brake Fluid Level LOW
| The brake fluid level is low. Check the brake system immediately. See
Brake Fluid Check.
|
Check Brake System
| The brake system needs servicing. Stop the vehicle in a safe place. Contact an authorized dealer.
|
Park Brake Engaged
| The parking brake is set, the engine is running and you drive your vehicle more than 3 mph (5 km/h). If the warning stays on after you release the parking brake, contact an authorized dealer as soon as possible.
|
Doors and Locks
Message
| Action
|
---|
Driver Door Ajar
| The driver door is not completely closed.
|
Passenger Door Ajar
| The passenger door is not completely closed.
|
Rear Left Door Ajar
| The rear left door is not completely closed.
|
Rear Right Door Ajar
| The rear right door is not completely closed.
|
Liftgate Ajar
| The liftgate is not completely closed.
|
Hood Ajar
| The hood is not completely closed.
|
Switches Inhibited Security Mode
| The system has disabled the door switches.
|
Factory Keypad Code XXXXX
| The factory keypad code displays in the information display after the system resets the keypad. See
Passive Anti-Theft System.
|
Driver Alert
Message
| Action
|
---|
Driver Alert Warning Rest Now
| Stop and rest as soon as it is safe to do so.
|
Driver Alert Warning Rest Suggested
| Take a rest soon.
|
Electronic Stability Control
Message
| Action
|
---|
ESC Service required
| The system detects a malfunction due to a blocked sensor.
|
ESC Off
| Displays the traction control system status.
|
ESC On
| Displays the traction control system status.
|
Engine
Message
| Action
|
---|
High Engine Temperature Stop Safely
| Displays when the engine temperature is too high.Stop your vehicle in a safe place and allow the engine to cool.If the problem persists, contact an authorized dealer.See
Engine Coolant Check.
|
Engine Fault Service Now
| Engine service is required. Contact an authorized dealer.
|
Engine Oil Level Low Check Level
| Check the engine oil level. See
Engine Oil Check.
|
Fuel
Message
| Action
|
---|
Fuel Level LOW
| An early reminder of a low fuel condition.
|
Check Fuel Fill Inlet
| The fuel fill inlet may not be properly closed.
|
Hill Descent Control
Message
| Action
|
---|
Hill Descent Control OFF
| Displays when you deactivate hill descent control mode.
|
For Hill Descent Reduce Speed
| Displays when hill descent speed exceeds
20 mph (32 km/h).
|
For Hill Descent Select Gear
| Displays when hill descent control mode requires you to shift the transmission into gear.
|
Hill Descent Driver Resume Control
| Displays when the hill control mode requires you to resume control.
|
Hill Descent Control Fault
| Displays when a hill descent system fault is present.
|
Hill Descent Control Off System Cooling
| Displays when you disable the hill descent control mode to cool the brake system.
|
Hill Descent Control Ready
| Displays when you activate the hill descent control mode.
|
Hill Start Assist
Message
| Action
|
---|
Hill Start Assist Not Available
| Hill start assist is not available. Contact an authorized dealer. See
Hill Start Assist.
|
Keys and Intelligent Access
Message
| Action
|
---|
To START Press Brake
| A reminder to press the brake while starting your vehicle.
|
No Key Detected
| The system does not detect the key.See
Keyless Starting.
|
Restart Now or Key is Needed
| When you press the Start Stop button to shut off the engine, the system does not detect an Intelligent Access key inside your vehicle.
|
Full Accessory Power Active
| Your vehicle is in the run ignition state.
|
Starting System Fault
| There is a problem with your vehicle’s starting system. Contact an authorized dealer for service.
|
Key Program Successful
| You have successfully programmed an intelligent access key to the system.
|
Key Program Failure
| You have failed to program an intelligent access key to the system.
|
Max Number of Keys Learned
| You have programmed the maximum number of keys to the system.
|
Not Enough Keys Learned
| You have not programmed enough keys to the system.
|
Key Battery Low Replace Soon
| The key battery is low. Change the battery as soon as possible. See
Remote Control.
|
Engine ON
| Informs you that you are exiting your vehicle with the intelligent access key and the engine is on.
|
Lane Keeping System
Message
| Action
|
---|
Lane Keeping Sys. Malfunction Service Required
| The system has malfunctioned. Contact an authorized dealer as soon as possible.
|
Front Camera Temporarily Not Available
| The system has detected a condition that has caused the system to be temporarily unavailable.
|
Front Camera Low Visibility Clean Screen
| The system has detected a condition that requires a clean windshield to operate properly.
|
Front Camera Malfunction Service Required
| The system has malfunctioned. Contact an authorized dealer as soon as possible.
|
Keep Hands on Steering Wheel
| The system requests the driver to keep their hands on the steering wheel.
|
Maintenance
Message
| Action
|
---|
LOW Engine Oil Pressure
| Stop your vehicle as soon as safely possible. Switch off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible.
|
Change Engine Oil Soon
| The engine oil life remaining is 10% or less.
|
Oil Change Required
| The oil life left reaches 0%.
|
Engine Coolant Overtemperature
| The engine coolant temperature is excessively high.
|
Washer Fluid Level Low
| The washer fluid is low and needs refilling.
|
Transport Mode Contact Dealer
| Indicates that your vehicle is still in Transport mode. This may not allow some features to operate properly. Contact an authorized dealer.
|
Factory Mode Contact Dealer
| Indicates that your vehicle is still in Factory mode. This may not allow some features to operate properly. Contact an authorized dealer.
|
MyKey
Message
| Action
|
---|
MyKey Not Created
| You cannot program a MyKey during key programming.
|
MyKey Active Drive Safely
| MyKey is active.
|
Speed Limited to XX MPH/km/h
| When starting your vehicle, a MyKey is in use and the MyKey speed limit is on.
|
Vehicle Near Top Speed
| When a MyKey is in use, the MyKey speed limit is on and your vehicle speed is approaching 80 mph (130 km/h).
|
Check Speed Drive Safely
| MyKey is active.
|
Buckle Up to Unmute Audio
| A MyKey is in use and Belt-Minder is active.
|
Could Not Program Integrated Key
| You attempted to program a spare key using two existing MyKeys.
|
Park Aid
Message
| Action
|
---|
Check Park Aid
| The system has detected a condition that requires service. Contact an authorized dealer. See
Principle of Operation.
|
Check Rear Park Aid
| The system has detected a condition that requires service. Contact an authorized dealer. See
Rear Parking Aid.
|
Front Park Aid On Off
| Displays the park aid status.
|
Rear Park Aid On Off
| Displays the park aid status.
|
Park Brake
Message
| Action
|
---|
Park Brake Engaged
| You have set the parking brake and you have driven the vehicle more than 3 mph (5 km/h). If the warning stays on after you have released the parking brake, contact an authorized dealer.
|
Power Steering
Message
| Action
|
---|
Steering Malfunction Service Now
| The power steering system has detected a condition that requires service. Contact an authorized dealer.
|
Service Power Steering Now
| The power steering system is not working.Stop your vehicle at a safe place.Contact an authorized dealer.
|
Steering Assist Fault
| The power steering system has detected a condition within the power steering system, or passive entry or passive start system requires service. Contact an authorized dealer.
|
Steering column lock: Remove and re-insert key while turning wheel to unlock
| You need to turn the steering wheel in order to disengage the steering lock.
|
Pre-Collision Assist
Message
| Action
|
---|
Pre-Collision Warning Malfunction
| A fault with the system has occurred. Contact an authorized dealer.
|
Pre-Collision Warning Not Available Sensor Blocked See Manual
| You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor. You can typically clean the sensor to resolve. See
Pre-Collision Assist.
|
Pre-Collision Warning Not Available
| A fault with the system has occurred. Contact an authorized dealer.
|
Remote Start
Message
| Action
|
---|
To Drive: Press Brake and Gear Shift Button
| A reminder to apply the brake and push the gearshift button to drive your vehicle after a remote start.
|
Seats
Message
| Action
|
---|
Occupant Sensor BLOCKED Remove Objects Near Passenger Seat
| Objects are by the passenger seat. After you move the objects away from the seat, if the warning stays on or continues to come on, contact an authorized dealer as soon as possible.
|
Memory Recall Not Permitted While Driving
| A reminder that memory seats are not available while driving.
|
Memory X Saved
| Shows where you have saved your memory setting.
|
Starting System
Message
| Action
|
---|
To START Press Brake
| A reminder to apply the brake when starting your vehicle.
|
Cranking Time Exceeded
| The starter has exceeded its cranking time in attempting to start your vehicle.
|
Engine Start Pending Please Wait
| The starter is attempting to start your vehicle.
|
Pending Start Cancelled
| The system has cancelled the pending start.
|
Tire Pressure Monitoring System
Message
| Action
|
---|
LOW Tire Pressure
| One or more tires on your vehicle have low tire pressure.See
Tire Pressure Monitoring System.
|
Tire Pressure Monitor Fault
| The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer. See
Tire Pressure Monitoring System.
|
Tire Pressure Sensor Fault
| A tire pressure sensor is malfunctioning, or your spare tire is in use. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible. See
Tire Pressure Monitoring System.
|
Terrain Management System
Message
| Action
|
---|
Normal Mode Active
| Displays terrain management normal mode is currently active.
|
Snow, Gravel, Grass Mode Active
| Displays terrain management snow, gravel, grass mode is currently active.
|
Mud, Rut Mode Active
| Displays terrain management mud, ruts mode is currently active.
|
Sand Mode Active
| Displays terrain management sand mode is currently active.
|
Terrain Management System Fault
| Displays when the terrain management system detects an error.
|
Mode Change Not Accepted, Retry
| Displayed when terrain management mode cannot be changed at the time of your request.
|
Traction Control
Trailer
Message
| Action
|
---|
Trailer Sway Reduce Speed
| Displays when the trailer sway control has detected a trailer sway. See
Trailer Sway Control.
|
Transmission
Message
| Action
|
---|
Transmission Malfunction Service Now
| Contact an authorized dealer.
|
Transmission Overtemperature Stop Safely
| The transmission is overheating and needs to cool.Stop in a safe place as soon as possible.
|
Transmission Overheating Stop Safely
| The transmission is overheating and needs to cool.Stop in a safe place as soon as possible.
|
Transmission Service Required
| Contact an authorized dealer.
|
Transmission Too Hot Press Brake
| The transmission is getting hot. Stop to let it cool.
|
Transmission Limited Function See Manual
| The transmission has overheated and has limited functionality.
|
Transmission Warming Up Please Wait
| The transmission is too cold. Wait for it to warm up before you drive.
|
Transmission Not in Park
| A reminder to shift into park.
|
Press Brake Pedal
| A request for you to apply the brake as needed by the transmission.
|
Transmission Adjusted
| The transmission has adjusted the shift strategy.
|
Transmission AdaptMode
| The transmission is adjusting the shift strategy.
|
Transmission IndicatMode Lockup On
| The transmission is locked and unable to select gears.
|
Transmission IndicatMode Lockup Off
| The transmission is unlocked and free to select gears.
|