Lighting - Headlamp Exit Delay

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Headlamp Exit Delay

Set the delay time to keep the headlamps on for up to three minutes after switching off the ignition.

Follow the steps below to change the delay time:

Note: Complete steps 1 through 6 within 10 seconds.

Switch the ignition off.

Select the autolamp position on the lighting control.

Switch the lighting control to the off position.

Switch the ignition on.

Switch the ignition off.

Select the autolamp position on the lighting control. The headlamps and parking lamps turn on.

Switch the lighting control to the off position when reaching the required delay time. The headlamps and parking lamps turn off.

Set the headlamp exit delay to one of the following settings:

Off.
10 seconds.
20 seconds.
120 seconds.

Note: Adjust the time delay using the display controls in the information display. See Information Displays.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

2018 Explorer Owner's Manual