WARNING:
Switch the lamps and the ignition off. Failure to do so could result in serious personal injury.
WARNING:
Bulbs can become hot. Let the bulb cool down before removing it. Failure to do so could result in personal injury. |
Headlamp
AHeadlamp high beam. BFront direction indicator.
|
Front Direction Indicator
- Switch all of the lamps and the ignition off.
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Headlamp High Beam
Halogen Bulb
- Switch all of the lamps and the ignition off.
- Carefully remove the cover.
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
Note:
You cannot separate the bulb from the bulb holder.
Note:
Do not touch the bulb glass.
LED Bulb (If Equipped)
LED lamps are not serviceable items.See an authorized dealer if they fail.
Rear Direction Indicator and Reversing Lamp
- Switch all of the lamps and the ignition off.
- Use a suitable tool, for example a screwdriver, to carefully remove the screw covers.
- Remove the retaining bolts from the lamp assembly.
- Gently pull the lamp assembly away from the vehicle.
- Release the wire from the securing clip.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
AReverse lamp. BRear direction indicator.
|
LED Lamps
LED lamps are not serviceable items.See an authorized dealer if they fail.
The following lamps are LED:
- Front fog lamps
- Front side marker lamps.
- Front signature lamps.
- Daytime running lamps.
- Headlamp high beam (If equipped).
- Headlamp low beam.
- Side direction indicator.
- Rear side marker lamp.
- Brake and rear lamp.
- Central high mounted brake lamp.
License Plate Lamp
- Use a suitable tool, for example a screwdriver, to carefully remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.