This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Remote Control - Vehicles With: Keyless Entry and Push Button Start
Passive Key
Type 1
Type 2
The key must be in your vehicle to use the push button start.
Removable Key Blade
The passive key also contains a removable key blade that you can use to unlock your vehicle.
Push the release button and pull the key blade out.
Changing the Remote Control Battery
Note:
Refer to local regulations when disposing of transmitter batteries.
Note:
Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note:
You do not need to reprogram the remote control after you have replaced its battery, it should operate normally.
The remote control uses one coin-type three-volt lithium battery CR2450 or equivalent.
- Push the release button and pull the key blade out.
- Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover.
- Insert a suitable tool, for example a screwdriver, in the position shown and carefully remove the battery.
- Install a new battery with the + facing upward.
- Reinstall the battery cover and the key blade.
Locating Your Vehicle
Press the lock button on the key twice within three seconds. The direction indicators flash.
Thank You For Your Feedback