This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Using Cruise Control
Press and release the button, or tap the brake pedal to cancel the set speed.
WARNING:
Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
WARNING:
When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes. |
To help the system to maintain the set speed when going downhill, downshift to a lower gear.
Your vehicle speed could decrease below the set speed when driving uphill.
Note:
The system cancels if your vehicle speed drops below
10 mph (16 km/h) under the set speed when driving uphill.
The cruise controls are on the steering wheel. See
Using Cruise Control.
Switching Cruise Control On
For vehicles without Speed Limiter, press and release the button. | 
For vehicles with Speed Limiter, press and release the button. |
The indicator displays in the instrument cluster.
Setting the Cruise Speed
Drive to your preferred speed.
Press and release to set the current speed. | 
Press and release to set the current speed. |
Take your foot off the accelerator pedal.
Note:
The indicator changes color.
Changing the Set Speed
|
Press and release to increase the set speed in small increments. |
Press and release to decrease the set speed in small increments. |
Press and hold either button to accelerate or decelerate, respectively. Release the button when you reach your preferred speed.
Press the accelerator or brake pedal until you reach your preferred speed. Press either button.
Note:
If you accelerate by pressing only the accelerator pedal, the set speed does not change. When you release the accelerator pedal, your vehicle returns to the speed you previously set.
Canceling the Set Speed
Press and release the button, or tap the brake pedal to cancel the set speed.Note:
The system remembers the set speed.
Resuming the Set Speed
Press and release to resume the set speed. |
Switching Cruise Control Off
For vehicles without Speed Limiter, press and release the button when the system is in standby mode or switch the ignition off. |
For vehicles with Speed Limiter, press and release the button when the system is in standby mode or switch the ignition off. |
Note:
You erase the set speed when you switch the system off.
Thank You For Your Feedback