This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Capacities and Specifications - 3.3L, Gasoline
Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:- Component damage not covered by the vehicle warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Air Conditioning System
WARNING:
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. |
Capacities
| Variant | Refrigerant | Refrigerant Oil |
|---|---|---|
| All. | 35 oz (0.99 kg) | 5.92 fl oz (175 ml) |
Materials
| Name | Specification |
|---|---|
| R-1234yf Refrigerant YN-33-A | WSS-M17B21-A |
| Motorcraft® R-1234yf Refrigerant PAG Oil YN-35 | WSS-M2C300-A2 |
Automatic Transmission
Note:
Automatic transmissions that require MERCON® ULV transmission fluid should only use MERCON® ULV transmission fluid.The use of any other fluid may cause transmission damage.
Capacities
| Variant | Quantity |
|---|---|
| All. | 12.6 qt (11.9 L)1 |
1 Approximate dry fill capacity. Actual amount may vary during fluid changes.
Materials
| Name | Specification |
|---|---|
| Motorcraft® MERCON® ULV Automatic Transmission Fluid XT-12-QULV | WSS-M2C949-A, |
Engine Coolant
Capacities
| Variant | Quantity |
|---|---|
| All. | 14.2 qt (13.4 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® Yellow Prediluted Antifreeze/Coolant VC-13DL-G | WSS-M97B57-A2 |
Engine Oil
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SN PLUS requirements and display the API Certification Mark for gasoline engines.
Capacities
| Variant | Including the Oil Filter |
|---|---|
| All. | 6.0 qt (5.7 L) |
Materials
| Name | Specification |
|---|---|
| Engine Oil - SAE 5W-20 - Synthetic Blend Motor Oil XO-5W20-Q1SP | WSS-M2C945-B1 |
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches
-22.0 °F (-30 °C) or below.
Materials
| Name | Specification |
|---|---|
| Engine Oil - SAE 0W-20 - Synthetic Blend Motor Oil XO-0W20-Q1SP | WSS-M2C947-B1 |
Fuel Tank
Capacities
| Variant | Quantity |
|---|---|
| All. | 20.2 gal (76.5 L) |
Grease
Materials
| Name | Specification |
|---|---|
| Motorcraft® Premium Long-Life Grease XG-1-E1 | ESA-M1C75-B |
| Motorcraft® Multi-Purpose Grease Spray XL-5-A | ESB-M1C93-B |
Hydraulic Brake System
Materials
| Name | Specification |
|---|---|
| Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid PM-20 | WSS-M6C65-A2 |
Note:
We recommend using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause reduced brake performance and not meet our performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
Locks
Materials
| Name | Specification |
|---|---|
| Motorcraft® Penetrating and Lock Lubricant XL-1 | - |
Transfer Case
Capacities
| Variant | Quantity |
|---|---|
| All. | 1.1 qt (1 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC | WSS-M2C938-A |
Front Axle
Capacities
| Variant | Quantity |
|---|---|
| Four wheel drive. | 0.6 qt (0.6 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL | WSL-M2C192-A |
Rear Axle
Capacities
| Variant | Quantity |
|---|---|
| All. | 1.7 qt (1.6 L) |
Materials
| Name | Specification |
|---|---|
| Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant XY-75W85-QL | WSS-M2C942-A |
Washer Reservoir
Capacities
| Variant | Quantity |
|---|---|
| All. | Fill as required. |
Materials
| Name | Specification |
|---|---|
| Motorcraft® Premium Windshield Wash Concentrate with Bitterant ZC-32-B2 | WSS-M14P19-A |
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.