This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Using Cruise Control
The indicator appears in the information display.
WARNING:
Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
WARNING:
When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes. |
To help the system to maintain the set speed when going downhill, downshift to a lower gear.
Note:
The system cancels if your vehicle speed drops below
16 km/h (10 mph) under the set speed when driving uphill.
The cruise controls are on the steering wheel.
Switching Cruise Control On
Press and release the cruise control button.
The indicator appears in the information display.Setting the Cruise Speed
- Drive to desired speed.
- Press and release SET+ or SET-.
- Take your foot off the accelerator pedal.
- The indicator changes color in the information display.
Changing the Set Speed
- Press and release SET+ or SET-. When you select km/h as the display measurement in the information display the set speed changes in approximately 1 km/h increments. When you select mph as the display measurement in the information display the set speed changes in approximately 1 mph increments.
- Press the accelerator or brake pedal until you reach the desired speed. Press and release SET+ or SET-.
- Press and hold SET+ or SET-. Release the control when you reach the desired speed.
Note:
If you accelerate by pressing the accelerator pedal, the set speed will not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
Canceling the Set Speed
Press and release CAN or tap the brake pedal. The set speed does not erase.
Resuming the Set Speed
Press and release RES.
Switching Cruise Control Off
Press and release the OFF button, when the system is in standby mode or switch the ignition off.
Note:
You erase the set speed when you switch the system off.
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.