Capacities and Specifications - Capacities and Specifications - 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost (90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY), 1.0L EcoBoost™
This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Capacities and Specifications - 1.0L EcoBoost (74kW/100PS)/1.0L EcoBoost (90kW/120PS)/1.0L EcoBoost (103kW/140PS) (YY), 1.0L EcoBoost™
WARNING:
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. |
Capacities
| Item | Capacity |
|---|---|
| Engine oil fill capacity including the oil filter. | 4.6 L (1.0 gal) |
| Engine oil fill capacity excluding the oil filter. | 4.4 L (1.0 gal) |
| Engine coolant fill capacity. | 5.6 L (1.2 gal) |
| Engine coolant fill capacity.1 | 7.2 L (1.6 gal) |
| Manual transmission fluid fill capacity. | 1.2 L (0.26 gal) |
| Automatic transmission fluid fill capacity. | 8.7 L (1.9 gal) |
| Fuel tank fill capacity. | 48 L (10.6 gal) |
| Washer system fill capacity. | 2.5 L (0.5 gal) |
1Automatic transmission.
Adding Engine Oil
Only add engine oil that meets the defined specification and viscosity grade in small quantities of no more than
0.6 L (0 gal). To avoid overfilling, wait for one minute after each refill step to allow the engine oil to flow into the oil pan and register on the engine oil dipstick. See
Engine Oil Check.
Specifications
Use oil and fluid that meets the defined specification and viscosity grade. Using other fluids could result in damage not covered by the vehicle Warranty.
Using other fluids could result in damage not covered by the vehicle Warranty.
Materials
| Name | Specification |
|---|---|
| Engine Oil - SAE 5W-20 | WSS-M2C948-A |
| Antifreeze Super Plus Premium Ready Mix 2U2J-19544-xxxx | WSS-M97B44-D2 |
| Brake Fluid DOT 4 LV High Performance BU7J-M6C65-xxxx | WSS-M6C65-A2 |
| Automatic Transmission Oil P-ULV HU7J-M2C949-AB, HU7J-M2C949-BA | WSS-M2C949-A, |
| Screen Wash FU7J-19C544-AA/BA/DA/EA/GA/HA | WSS-M14P19-A |
If you are unable to find an engine oil that meets the specification defined by WSS-M2C948-A, it is acceptable to use a SAE 5W-20 engine oil that is defined by ACEA A5/B5.
Note:
Do not use more than
1 L (1.1 qt) of the alternative engine oil between scheduled service intervals.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:- Component damage which may not be covered by the vehicle Warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.