The speed at which the engine idles immediately after starting is optimized to minimize vehicle emissions and maximize cabin comfort and fuel economy.
Note:   You can only attempt to start the engine for a limited amount of time before the starting system temporarily disables. If you exceed the starting time limit, a message may appear and you cannot attempt to start the engine for at least 15 minutes.
Before starting your vehicle, check the following:
  • Make sure the headlamps and electrical accessories are off.
  • Make sure the parking brake is on.
  • Make sure the transmission is in neutral.
Vehicles with an Ignition Key
  1. Fully press the clutch pedal.
Note:   Do not touch the accelerator pedal.
  1. Turn the key to position III.
Note:   The engine may continue cranking for up to 15 seconds or until it starts.
Note:   The engine takes longer to start at lower temperatures. It may crank for several seconds when very cold.
Vehicles with a Push Button Ignition Switch
See   Push Button Ignition Switch. 
Failure to Start
If you cannot start the engine after 3 attempts, wait 10 seconds and do the following:
Vehicles with an Ignition Key
  1. Fully press the clutch pedal.
  1. Apply the parking brake.
  1. Shift into neutral.
  1. Fully press the accelerator pedal and hold it there.
  1. Turn the key to position III and wait until the engine stops cranking.
  1. Release the accelerator pedal.
  1. Start the engine.
Vehicles with a Push Button Ignition Switch
See   Push Button Ignition Switch. 
Automatic Engine Shutdown
For vehicles with a push button ignition switch, the engine shuts down if it has been idling for an extended period. The ignition also turns off to save battery power. Before your vehicle shuts down, a message appears in the information display showing a timer counting down. If you do not intervene within 30 seconds, your vehicle shuts down. Another message appears in the information display to inform you that your vehicle has shut down to save fuel. Start your vehicle as normal.
Automatic Engine Shutdown Override
You can stop the shutdown, or reset the timer, at any point before the 30-second countdown has expired by doing any of the following:
  • Pressing the brake or accelerator pedal.
  • Switching off the automatic engine shutdown in the information display.
  • Pressing the OK or RESET button during the 30-second countdown.
Switching the Automatic Engine Shutdown On or Off
To switch the automatic engine shutdown on or off, use the information display controls on the steering wheel to select the following:

Menu Item   Action  
Settings
Press the menu button.  
Vehicle Settings
Press the OK button.  
30min Max Idle
Press the OK button.  

Note:   You cannot permanently switch off the automatic shutdown.If you switch it off, it turns on each time you switch the ignition on.
Stopping the Engine When Your Vehicle is Stationary
Vehicles with an Ignition Key
  1. Shift into neutral.
  1. Turn the key to position 0.
  1. Apply the parking brake.
Vehicles with a Push Button Ignition Switch
See   Push Button Ignition Switch. 
Stopping the Engine When Your Vehicle is Moving
WARNING   WARNING:  Switching off the engine when your vehicle is still moving results in a significant decrease in braking assistance. Higher effort is required to apply the brakes and to stop your vehicle. A significant decrease in steering assistance could also occur. The steering does not lock, but higher effort could be required to steer your vehicle. When you switch the ignition off, some electrical circuits, for example airbags, also turn off. If you unintentionally switch the ignition off, shift into neutral (N) and restart the engine.

Vehicles with an Ignition Key
  1. Shift into neutral and use the brakes to bring your vehicle to a safe stop.
  1. Turn the key to position 0.
  1. Apply the parking brake.
Vehicles with a Push Button Ignition Switch
See   Push Button Ignition Switch. 
Guarding Against Exhaust Fumes
WARNING   WARNING:  Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes.

Important Ventilating Information
If you stop your vehicle and then leave the engine idling for long periods, we recommend that you do one of the following:
  • Open the windows at least 3 cm (1 in).
  • Set your climate control to outside air.
Engine Warning Lamps
Engine Warning Lamp  Malfunction Indicator Lamp
Check Engine
 If it illuminates when the engine is running this indicates a malfunction.The On Board Diagnostics system has detected a malfunction of the vehicle emission control system.
If it flashes, engine misfire may be occurring. Increased exhaust gas temperatures could damage the catalytic converter or other vehicle components. Avoid heavy acceleration and deceleration and have your vehicle immediately serviced.
Non Emission Powetrain Fault  Powertrain Warning Lamp
 If it illuminates when the engine is running this indicates a malfunction.If it flashes when you are driving, immediately reduce the vehicle speed.Avoid heavy acceleration and deceleration and have your vehicle immediately serviced.
 If both lamps illuminate when the engine is running, stop your vehicle as soon as it is safe to do so. Continuing to drive your vehicle may cause reduced power or the engine to stop. Switch the ignition off and attempt to restart the engine.Have your vehicle immediately checked.
Starting System Information Messages

Message   Action  
Full Accessory Power Active
Displays if you switch the ignition on and do not start the engine.  
Cranking Time Exceeded
Displays if you exceed the starting time limit. You cannot attempt to start the engine for 15 minutes. If you cannot start the engine after 15 minutes passes, have your vehicle immediately checked.  
Starting System Fault
Displays if you are unable to start your vehicle with a correctly coded key. The system has detected a fault that requires service.Have your vehicle checked as soon as possible.  

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok