Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
  • Component damage not covered by the vehicle Warranty.
  • Longer engine cranking periods.
  • Increased emission levels.
  • Reduced engine performance.
  • Reduced fuel economy.
  • Reduced brake performance.
Engine
Engine Oil
Capacities

Variant   Including the Oil Filter  
All.   6.4 L (1.4 gal)

Note:   The quantity of engine oil required to raise the indicated level on the dipstick from minimum to maximum is 2 L (0.4 gal).

Materials

NameSpecification
Ford-Castrol MagnatecWSS-M2C950-A
 
Engine Oil Top-Up
If you are unable to find an engine oil that meets the specification defined by WSS-M2C950-A, you can top-up with a SAE 0W-30 engine oil that is defined by ACEA C2.
Note:   Do not use more than 1 L (0.2 gal) of the alternative engine oil between scheduled service intervals.
Engine Coolant
Capacities

Variant   Quantity  
Vehicles with a manual transmission.   12.6 L (2.8 gal)
Vehicles with an automatic transmission.   11.6 L (2.6 gal)

Materials

NameSpecification
Antifreeze Super Plus Premium
FU7J-19544-xx		WSS-M97B44-D
 
Fuel Tank
Capacities

Variant   Quantity  
All.   47 L (10.3 gal)

AdBlue® Tank
Capacities

Variant   Quantity  
All.   10.4 L (2.3 gal)

Washer Reservoir
Capacities

Variant   Quantity  
Vehicles without headlamp washers.   4.2 L (0.9 gal)
Vehicles with headlamp washers.   5.8 L (1.3 gal)

Materials

NameSpecification
Screen Wash
FU7J-19C544-AA/BA/DA/EA/GA/HA		WSS-M14P19-A
 
Brake System

Materials

NameSpecification
Brake Fluid DOT 4 LV High Performance
BU7J-M6C65-xxxx		WSS-M6C65-A2
 

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok