Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage not covered by the vehicle warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Air Conditioning System
WARNING:
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. |
Capacities
Variant
| Refrigerant
| Refrigerant Oil
|
---|
All.
| 27 oz (0.765 kg) | 3.7 fl oz (110 ml) |
Materials
Name | Specification |
---|
Refrigerant - R-134A | WSH-M17B19-A
|
Refrigerant Oil | WSH-M1C231-B
|
Automatic Transmission
Note:
Only use MERCON® ULV transmission fluid for automatic transmissions that require MERCON® ULV transmission fluid. The use of any other fluid could cause transmission damage.
Capacities
Variant
| Quantity
|
---|
Ten-speed automatic transmission (10R140).
| 18.2 qt (17.2 L)1
|
1Approximate dry fill capacity. Actual amount could vary during fluid changes.
Materials
Name | Specification |
---|
Automatic Transmission Fluid | WSS-M2C949-A,
|
Engine Coolant
Capacities
Variant
| Quantity
|
---|
All.
| 22.5 qt (21.3 L) |
Materials
Name | Specification |
---|
Antifreeze | WSS-M97B57-A2
|
Engine Oil
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SN PLUS requirements and display the API Certification Mark for gasoline engines.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that your vehicle warranty does not cover.
Capacities
Variant
| Including the Oil Filter
|
---|
All.
| 8.0 qt (7.57 L) |
Materials
Name | Specification |
---|
Engine Oil - SAE 5W-30 - Synthetic Blend | WSS-M2C946-B1
|
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches
-22.0 °F (-30 °C) or below.
Materials
Name | Specification |
---|
Engine Oil - SAE 0W-30 | WSS-M2C953-B1
|
Fuel Tank
Capacities
Variant
| Quantity
|
---|
Complete vehicle-all except 176 inch wheelbase and incomplete vehicles.
| 34.0 gal (128.7 L) |
Complete vehicle-176 inch wheelbase.
| 48.0 gal (181.7 L) |
Incomplete vehicle, aft- axle -location.
| 40.0 gal (151.4 L) |
Incomplete vehicle, middle location.
| 26.5 gal (100.3 L) |
Grease
Materials
Name | Specification |
---|
Grease - High Temperature | WSS-M1C267-A1
|
Multi-Purpose Grease | ESB-M1C93-B
|
Grease | ESA-M1C75-B
|
Hydraulic Brake System
Materials
Name | Specification |
---|
Brake Fluid | WSS-M6C65-A2
|
Note:
We recommend using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid could cause reduced brake performance and not meet our performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials could result in brake system damage and possible failure.
Power Steering System
Materials
Name | Specification |
---|
Automatic Transmission Fluid | WSS-M2C938-A
|
Locks
Materials
Name | Specification |
---|
Penetrating Fluid | -
|
Transfer Case
Capacities
Variant
| Quantity
|
---|
All.
| 1.9 qt (1.8 L) |
Materials
Name | Specification |
---|
Automatic Transmission Fluid | WSS-M2C938-A
|
Front Axle
Capacities
Variant
| Quantity
|
---|
With Tremor package (with limited slip).
| 2.75 qt (2.6 L)234
|
Without Tremor package (without limited slip).
| 2.75 qt (2.6 L)
|
2For complete refill of limited slip axles, add 5.4 fl oz. (160 ml) of Additive Friction Modifier XL-3 or equivalent, meeting specification EST-M2C118-A. Include this friction modifier in the total lube volume of 2.75 qt (2.6 L).
Materials
Name | Specification |
---|
Friction Modifier | EST-M2C118-A
|
Gear/Transmission Fluid - SAE 80W-90 | WSP-M2C197-A
|
Rear Axle - 10.5
Capacities
Variant
| Quantity
|
---|
With Electronic Locking Differential.
| 3.3–3.5 qt (3.1–3.3 L) |
Without Electronic Locking Differential.
| 3.5–3.6 qt (3.3–3.4 L) |
Materials
Name | Specification |
---|
Gear/Transmission Fluid - SAE 75W-85 | WSS-M2C942-A
|
Rear Axle - 10.8
Capacities
Variant
| Quantity
|
---|
All.
| 3.6 qt (3.42 L) |
Materials
Name | Specification |
---|
Gear/Transmission Fluid - SAE 75W-140 | WSL-M2C192-A
|
Rear Axle - 11.8 (With HD Tow Option)
Capacities
Variant
| Quantity
|
---|
All.
| 3.78 qt (3.58 L)234
|
3For complete refill of limited slip axles, add 7.1 fl oz. (210 ml) of Additive Friction Modifier XL-3 or equivalent, meeting specification EST-M2C118-A. Include this friction modifier in the total lube volume of 3.78 qt (3.58 L).
Materials
Name | Specification |
---|
Friction Modifier | EST-M2C118-A
|
Gear/Transmission Fluid - SAE 75W-140 | WSL-M2C192-A
|
Rear Axle - 11.8 (Without HD Tow Option)
Capacities
Variant
| Quantity
|
---|
All.
| 3.78 qt (3.58 L)234
|
4For complete refill of limited slip axles, add 7.1 fl oz. (210 ml) of Additive Friction Modifier XL-3 or equivalent, meeting specification EST-M2C118-A. Include this friction modifier in the total lube volume of 3.78 qt (3.58 L).
Materials
Name | Specification |
---|
Friction Modifier | EST-M2C118-A
|
Gear/Transmission Fluid - SAE 80W-90 | WSP-M2C197-A
|
Washer Reservoir
Capacities
Variant
| Quantity
|
---|
All.
| Fill as required.
|
Materials
Name | Specification |
---|
Windshield Washer Fluid | WSS-M14P19-A
|