Note:   Depending on your vehicle options and instrument cluster type, not all of the messages display or are available. The information display could abbreviate or shorten certain messages.
Information Display Control Buttons
 Press the OK button on the steering wheel to remove the warning.The information display removes other messages after a short time.
You need to confirm certain messages before you can access the menus.
Active Park

Message   Action  
Active Park Fault
The system has detected a fault that requires service.Have the system checked by an authorized dealer.  

Adaptive Cruise Control

Message   Action  
Adaptive Cruise Malfunction
A radar malfunction is preventing the adaptive cruise control from engaging.  See   Using Adaptive Cruise Control.   
Adaptive Cruise Not Available
A condition exists such that the adaptive cruise cannot function properly.   See   Using Adaptive Cruise Control.   
Adaptive Cruise Not Available Sensor Blocked See Manual
You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor. You can typically clean the sensor to resolve.   See   Using Adaptive Cruise Control.   
Normal Cruise Active Adaptive Braking Off
You select normal cruise control. The system does not brake or react to traffic.  
Front Sensor Not Aligned
A radar malfunction is preventing the adaptive cruise control from engaging.  
Adaptive Cruise - Driver Resume Control
The adaptive cruise has reinstated controls to the driver.  
Adaptive Cruise Speed Too Low to Activate
Your vehicle speed is too slow to activate the adaptive cruise.  
Adaptive Cruise Shift Down
The adaptive cruise is automatically adjusting the gap distance and you need to shift the transmission into a lower gear.  

Adaptive Steering

Message   Action  
Adaptive Steering Initialization
The adaptive steering system detects a difference between steering wheel angle and the desired road wheel angle. The steering wheel adjusts itself to correct this difference. This adjustment is part of normal system operation.  
Adaptive Steering Fault Service Required
The adaptive steering system is off. It is possible that the steering wheel could not be straight when the vehicle is driving straight ahead. If this message persists, see an authorized dealer.  
Adaptive Steering Loss Do Not Drive
The adaptive steering system integrity cannot be verified. Do not drive the vehicle and contact an authorized dealer immediately.  

AdvanceTrac and Traction Control

Message   Action  
Service AdvanceTrac
The system detects a condition that requires service. Contact an authorized dealer as soon as possible.  
AdvanceTrac Off
The status of the AdvanceTrac system after you switched it off.  
AdvanceTrac On
The status of the AdvanceTrac system after you switched it on.  
AdvanceTrac SPORT MODE
The status of the AdvanceTrac sport mode after you switched it on.  
Traction Control Off
The status of the traction control system after you switched it off.See  Using Traction Control .   
Traction Control On
The status of the traction control system after you switched it on. See  Using Traction Control .   

Airbag

Message   Action  
Occupant Sensor BLOCKED Remove Objects Near Passenger Seat
 Displays when the system detects a malfunction due to a blocked sensor.  

Alarm and Security

Message   Action  
Vehicle Alarm To Stop Alarm, Start Vehicle.
Alarm triggered due to unauthorized entry.   See   Anti-Theft Alarm.   

Automatic Engine Shutdown

Message   Action  
Engine Shuts Off In {seconds to shut off:#0} Seconds
The engine is getting ready to shut off.  
Engine Shut Off For Fuel Economy
The engine has shut off to help increase fuel economy.  
Engine Shuts Off in {seconds to shut off:#0} Seconds Press Ok to Override
The engine is getting ready to shut off. Follow the prompt from the message to override the shut down.  

Battery and Charging System

Message   Action  
Check Charging System
The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.  
Low Battery Features Temporarily Turned Off
The battery management system detects an extended low-voltage condition. Your vehicle disables various features to help preserve the battery. Turn off as many of the electrical loads as soon as possible to improve system voltage. If the system voltage has recovered, the disabled features operate again as normal.  
Turn Power Off To Save Battery
The battery management system determines that the battery is at a low state of charge. Turn your ignition off as soon as possible to protect the battery. This message clears once you restart your vehicle and the battery state of charge has recovered. Turning off unnecessary electrical loads allows faster battery state-of-charge recovery.  

Blind Spot Information and Cross Traffic Alert System

Message   Action  
Blindspot System Fault
A fault with the system has occurred. Contact an authorized dealer as soon as possible.  
Blindspot Not Available Sensor Blocked See Manual
The system sensors are blocked.  See   Blind Spot Information System.   
Vehicle Coming From X   The system detects a vehicle.   See   Blind Spot Information System.   
Cross Traffic Not Available Sensor Blocked See Manual
The blind spot information system and cross traffic alert system sensors are blocked.See   Blind Spot Information System.   
Cross Traffic System Fault
A fault with the system has occurred. Contact an authorized dealer as soon as possible.  
Cross Traffic Alert Deactivated Trailer Attached
The system automatically turns off and displays this message when you connect a trailer to the vehicle that does not have a trailer blind spot system or when you switch the trailer blind spot system off through the information display.  See   Blind Spot Information System.   
Blind Spot Alert Deactivated Trailer Attached
The system automatically turns off and displays this message when you connect a trailer to the vehicle that does not have a trailer blind spot system or when you switch the trailer blind spot system off through the information display.   See   Blind Spot Information System.   
Trailer Blind Spot Not available Due to Invalid Trailer
Displays when the trailer connected is a fifth wheel or gooseneck, or when the trailer width is wider than 10 ft (2.7 m) or longer than 33 ft (10 m).  

Diesel Messages
WARNING   WARNING:  When the Exhaust Filter Cleaning message appears in the information display, do not park near flammable materials, vapors or structures until filter cleaning is complete.


Message   Action  
Exhaust Filter Cleaning
Your vehicle has entered the cleaning mode. Various engine actions raises the exhaust temperature in the Diesel Particulate Filter system to burn off the particles (exhaust soot). After the vehicle burns the particles off, the exhaust temperature returns to normal levels. This message is NORMAL.  
Exhaust Filter Overloaded Drive to Clean
The diesel particulate filter is full of particles (exhaust soot) and you are not operating the vehicle in a manner that allows normal cleaning. Drive the vehicle above 30 mph (48 km/h) until the message turns off.  
Exhaust Filter Overloaded Clean Now
Exhaust Filter at Limit Clean Now
The diesel particulate filter is full of particles (exhaust soot) and you are not operating the vehicle in a manner that allows normal cleaning. Drive the vehicle above 30 mph (48 km/h) until the message turns off.  
Exhaust Filter at Limit Drive to Clean Now
Exhaust System Overheated Stop Safely NOW
Your vehicle exhaust system temperature exceeded the intended operating range. If this warning occurs, a tone sounds, followed by reduced engine power. The engine shuts down when your vehicle speed is below 3 mph (5 km/h) . Stop the vehicle as soon as safely possible. Have the system checked by an authorized dealer.  
Engine Warming Please Wait {seconds:00} sec
In extremely cold weather, typically below -15 °F (-26 °C) and if the engine block heater is not utilized, your engine will not respond to accelerator pedal movement for 30 seconds. This restriction allows your engine to properly circulate the oil to avoid engine damage.  
Exhaust Filter Drive Complete
Your diesel particulate filter is clean.  
Exhaust Filter Cleaned
Your diesel particulate filter is clean (OCR Only).  
Exhaust Filter Cleaning Stopped
The manual regeneration process has stopped (OCR Only).  
DEF Level Range: XX mi/km Refill Now   The distance you can travel before depleting the remaining diesel exhaust fluid.  
DEF Level Empty Speed Limited to XX MPH / km/h in XX mi/km   Your diesel exhaust fluid is nearing empty. Your vehicle’s top speed will become limited in the displayed distance. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.  See   Selective Catalytic Reductant System - Diesel.   
DEF Level Empty Speed Limited to XX MPH/km/h Upon Restart   Your remaining diesel exhaust fluid has depleted. Upon restart, your vehicle speed is now limited. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.   See   Selective Catalytic Reductant System - Diesel.   
DEF Level Empty Speed Limited to XX MPH/km/h   The diesel exhaust fluid is empty. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.   See   Selective Catalytic Reductant System - Diesel.   
DEF Level Empty Engine Idled Soon
The selective catalytic reduction system detects low exhaust fluid. The engine will eventually enter into an idle only mode. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle.   See   Selective Catalytic Reductant System - Diesel.   
DEF Level Empty Engine Idled See Manual
A problem exists with the selective catalytic reduction system causing your vehicle into an idle-only mode. If the exhaust fluid is empty, you must replenish the diesel exhaust fluid to resume normal operation of your vehicle.   See   Selective Catalytic Reductant System - Diesel.   
DEF Fault Speed Limited to XX MPH/km/h in XX mi/km   The selective catalytic reduction system detects a fault. The system displays your vehicle’s top speed limit and distance before limitation. Have the system checked by an authorized dealer.  
DEF Fault Speed Limited to XX MPH/km/h Upon Restart   The selective catalytic reduction system detects a fault. Upon restart, your vehicle speed is now limited. Have the system checked by an authorized dealer.  
DEF Fault Speed Limited to XX MPH/km/h   The selective catalytic reduction system detects a fault. The system displays your vehicle’s top speed limit. Have the system checked by an authorized dealer.  
Exhaust Filter Over Limit Service Now
You must have your vehicle serviced by an authorized dealer. Ignoring the warning message could lead to reduced drivability and customer expense, including damage to the diesel particulate filter. Your new vehicle warranty could not cover this damage.  
Water in Fuel Drain Filter
The water separator has reached a predetermined capacity and needs draining.   See   Draining the Fuel Filter Water Trap - 6.7L Diesel.   
Fuel Pressure Low
A low fuel pressure condition has occurred due to cold, low fuel level or fuel filters need to be changed.  See   Fuel Quality - Diesel.   

Doors and Locks

Message   Action  
X Door Ajar   The door(s) listed is not completely closed.  

Driver Alert

Message   Action  
Driver Alert Warning Rest Now
Stop and rest as soon as it is safe to do so.  
Driver Alert Warning Rest Suggested
Take a rest soon.  

Drivetrain

Message   Action  
To Engage Locking Differential Slow to XX mph/km/h   The electronic locking differential requests that you slow to a certain speed to engage.  
To Engage Locking Differential Release Accelerator Pedal
The electronic locking differential requests that you release the accelerator in order to engage.  
Check Locking Differential
An electronic locking differential (ELD) system fault is present. Contact an authorized dealer as soon as possible.  
Neutral Tow Enabled Leave Transmission in Neutral
The transfer case is in the neutral position. This message indicates that your vehicle is safe to tow with all four wheels on the ground.  
Neutral Tow Disabled
The transfer case is NOT in the neutral position. This message indicates that your vehicle is NOT safe to be towed with all four wheels on the ground.  

Engine

Message   Action  
Power Reduced to Lower Engine Temp
The engine has reduced power to help reduce high engine temperature.  

Fuel

Message   Action  
Fuel Level Low
An early reminder of a low fuel condition.  
Check Fuel Fill Inlet
The fuel fill inlet could not be properly closed.  

Keys and Remote Controls

Message   Action  
To START Press Brake
A reminder to press the brake while starting the vehicle.  
No Key Detected
The system does not detect a key in your vehicle.  See   Keyless Starting.   
Restart Now or Key is Needed
You pressed the StartStop button to switch off the engine and your vehicle does not detect your intelligent access key inside your vehicle.  
Full Accessory Power Active
Your vehicle is in the run ignition state.  
Starting System Fault
There is a problem with your vehicle’s starting system. See an authorized dealer for service.  
Key Program Successful
You have successfully programmed an intelligent access key to the system.  
Key Program Failure
You have failed to program an intelligent access key to the system.  
Max Number of Keys Learned
You have programmed the maximum number of keys to the system.  
Not Enough Keys Learned
You have not programmed enough keys to the system.  
Engine ON
Informs you that you are exiting your vehicle and the engine is on.  

Lane Keeping System

Message   Action  
Lane Keeping Sys. Malfunction Service Required
The system malfunctioned. Contact an authorized dealer as soon as possible.  
Front Camera Temporarily Not Available
The system detects a condition that has caused the system to be temporarily unavailable.  
Front Camera Low Visibility Clean Screen
The system detects a condition that requires you to clean the windshield in order for it to operate properly.  
Front Camera Malfunction Service Required
The system malfunctioned. Contact an authorized dealer as soon as possible.  
Keep Hands on Steering Wheel
The system requests you to keep your hands on the steering wheel.  

Maintenance

Message   Action  
Low Engine Oil Pressure
Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible.  
Change Engine Oil Soon
The engine oil life remaining is 10% or less.  
Oil Change Required
The oil life left is at 0%.  
Brake Fluid Level Low
The brake fluid level is low, inspect the brake system immediately.  See   Brake Fluid Check.   
Check Brake System
The brake system needs servicing.Stop your vehicle in a safe place.Contact an authorized dealer.  
Transport / Factory Mode Contact Dealer   Your vehicle is still in Transport or Factory mode. This could not allow some features to operate properly. See an authorized dealer.  
See Manual
The powertrain needs service due to a powertrain malfunction.  

MyKey

Message   Action  
MyKey not Created
You did not program a MyKey.  
MyKey Active Drive Safely
MyKey is active.  
Speed Limited to XX MPH/km/h   When switching on your vehicle and MyKey is in use, displays that the MyKey speed limit is on.  
Near Vehicle Top Speed
MyKey is in use and the MyKey speed limit is on and the vehicle speed is approaching 81 mph (130 km/h).  
Vehicle at Top Speed of MyKey Setting
You have reached the speed limit set for your MyKey.  
Check Speed Drive Safely
You have an active MyKey with a programmed set speed limit.  
Buckle Up to Unmute Audio
Belt-Minder turns on with a MyKey in use.  
AdvanceTrac On - MyKey Setting
With a MyKey in use, AdvanceTrac turns on.  
Traction Control On - MyKey Setting
With a MyKey in use, traction control turns on.  
MyKey Park Aid Cannot be Deactivated
With a MyKey in use, park aid is always on.  
Lane Keeping Alert On MyKey Setting
With a MyKey in use, lane keeping alert turns on.  

Off Road

Message   Action  
Hill Descent Control Active
Hill descent control mode is active.  
Hill Descent Control OFF
Hill descent control mode is inactive.  
For Hill Descent Reduce Speed XX MPH/km/h or Less   Your vehicle speed requirement for off-road mode entry has not been met.  
For Hill Descent Select Gear
You need to select a transmission gear for hill descent mode.  
Hill Descent Driver Resume Control
Hill descent control mode is deactivated and you must resume control.  
Hill Descent Control Fault
A hill descent system fault is present.  
Hill Descent Control Off System Cooling
The hill descent system is cooling due to overuse.  
Hill Descent Control Ready
The hill descent control system is ready.  

Park Aid

Message   Action  
Check Front Park Aid
The system has detected a fault that requires service.Contact an authorized dealer.See   Rear Parking Aid.   
Check Rear Park Aid
The system has detected a fault that requires service.Contact an authorized dealer.See   Rear Parking Aid.   
Front Park Aid On Off
Displays the park aid status.  
Rear Park Aid On Off
Displays the park aid status.  

Park Brake

Message   Action  
To Release: Press Brake and Switch
The electric parking brake is set and a manual release is attempted without the brake pedal being pressed.  
Park Brake Use Switch to Release
The electric park brake is set and an automatic release is attempted but cannot be performed. Perform a manual release.  
Release Park Brake
The electric park brake is set and your vehicle speed exceeds 3 mph (5 km/h). Release park brake before continued driving.  
Park Brake Not Applied
 The electric park brake is not fully applied.  
Park Brake Not Released
 The electric park brake is not fully released.  
Park Brake Maintenance Mode
The electric park brake system has been put into a special mode that is used to allow service of the rear brakes. Contact an authorized dealer.  
Park Brake Limited Function Service Required
The electric park brake system has detected a condition that requires service. Some functionality could still be available. Contact an authorized dealer.  
Park Brake Malfunction Service Now
The electric park brake system has detected a condition that requires service. Contact an authorized dealer.  

Power Steering

Message   Action  
Steering Fault Service Now
The power steering system detects a condition that requires service. See an authorized dealer.  
Steering Loss Stop Safely
The power steering system is not working.Stop your vehicle in a safe place.Contact an authorized dealer.  
Steering Assist Fault Service Required
The power steering system detects a condition within the power steering system or passive entry or passive start system requires service. Contact an authorized dealer.  
Steering Lock Malfunction Service Now
The steering lock system detects a condition that requires service. See an authorized dealer.  

Pre-Collision Assist

Message   Action  
Pre-Collision Assist Not Available Sensor Blocked
You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor. You can typically clean the sensor to resolve.  
Pre-Collision Assist Not Available
A fault with the system has occurred. Contact an authorized dealer as soon as possible.  

Remote Start

Message   Action  
To Drive: Press Brake and Gear Shift Button
A reminder to apply the brake and push the gearshift button to drive your vehicle after a remote start.  

Seats

Message   Action  
Memory Recall Not Permitted While Driving
A reminder that memory seats are not available while driving.  
Memory {0} Saved
Shows where you have saved your memory setting.  

Starting System

Message   Action  
To START Press Brake
A reminder to apply the brake when starting your vehicle .  
Cranking Time Exceeded
The starter has exceeded its cranking time in attempting to start your vehicle.  
Engine Start Pending Please Wait
The starter is attempting to start your vehicle.  
Pending Start Cancelled
The system has cancelled the pending start.  

Tailgate

Message   Action  
Tailgate Ajar
The tailgate is not completely closed.  

Tire Pressure Monitoring System

Message   Action  
Tire Pressure Low
One or more tires on your vehicle has low tire pressure.  See   Tire Pressure Monitoring System.   
Tire Pressure Monitor Fault
The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer.   See   Tire Pressure Monitoring System.   
Tire Pressure Sensor Fault
A tire pressure sensor is malfunctioning or your spare tire is in use.   See   Tire Pressure Monitoring System.  If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.  

Trail Control (If Equipped)

Message   Action  
Reduce Speed To Enter Trail Control
You must reduce your vehicle speed to use trail control.  
Trail Control Not Available with Park Brake Applied
You must release the park brake to use trail control.  
Trail Control Enabled Use SET Button to Set Speed
You successfully enabled trail control and must press SET to activate.  
Trail Control Off Driver Resume Control
A trail control system fault has occurred, the driver must resume control.  
Trail Control Off
The system has switched off.  
Trail Control Fault See Manual
A system fault is present.  
Trail Control Not Available with Cruise Control Active
You must switch the cruise control off to use trail control.  
Trail Control Not Available with Driver Door Open
You must close the door to use trail control.  
Descent Control Now Active Press Trail Control Switch To Exit   You switched descent control off, causing the system to turn trail control propulsion off. The vehicle still brakes if descending a hill. You must press the trail control switch to reset the system and switch it off. You can press the switch again to switch this system on.  
Trail Control Not Available While Pro Trailer Backup Assist™ Active
Displays when you must switch off the trailer backup assist to use trail control.  
Set Trail Control to 1 MPH to Aid in Getting Unstuck in Sand
Displays when the system detects that you could be stuck in sand and turns trail control on to the lowest set speed.  
Set Trail Control to 2 km/h to Aid in Getting Unstuck in Sand

Trailer

Message   Action  
Trailer Brake Gain: {trailer gain value:#0.0}
The current gain setting for the trailer brake.  
Trailer Brake Gain: {trailer gain value:#0.0} No Trailer
The current gain setting for the trailer brake when you do not have a trailer connected.  
Trailer Brake Module Fault
Faults sensed in the Integrated Trailer Brake Control Module followed by a single chime.  See   Towing a Trailer.   
Trailer Connected
The system detects a correct trailer connection during a given ignition cycle.  
Trailer Disconnected
The system senses a trailer connection becomes disconnected, either intentionally or unintentionally, during a given ignition cycle.  
Trailer Sway Reduce Speed
The trailer sway control has detected trailer sway.  
Trailer Wiring Fault
There are certain faults in your vehicle wiring and trailer wiring/brake system.   See   Towing a Trailer.   
Trailer Left Turn Lamps Fault Check Lamps
There is a fault with your trailer turn lamp. Check your lamp.  
Trailer Right Turn Lamps Fault Check Lamps
There is a fault with your trailer turn lamp. Check your lamp.  
Trailer Battery Not Charging See Manual
There is a fault with your trailer battery.   See   Towing a Trailer.   
Trailer Lighting Module Fault See Manual
There is a fault with your vehicle trailer lighting module.   See   Towing a Trailer.   
Trailer Tire Low Specified:
One or more tires on your trailer is below the specified tire pressure.  
Trailer Tire Pressure Sensor Fault
A trailer tire pressure sensor is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.  
Trailer Tire Pressure Monitor Fault
The trailer tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer.  
Trailer Tire Pressure Monitor Capability Not Detected
The system cannot detect the trailer tire pressure monitoring system.  
Trailer Tire Pressure Indication Not Setup See Manual
The trailer tire pressure monitoring system is not setup.  See   Tire Pressure Monitoring System.   

4WD

Message   Action  
Check 4x4
A 4X4 system fault is present. Contact an authorized dealer as soon as possible.  
4x4 Shift in Progress
The 4X4 system is making a shift.  
For 4x4 LOW Shift to N
Displays when you attempt to switch to 4X4 LOW and you do not shift the transmission to neutral (N).  
For 4x4 LOW Slow to 3 MPH
Displays when you attempt to switch to 4X4 LOW and your vehicle's speed is too fast.  
For 4x4 LOW Slow to 5 km/h
To Exit 4x4 LOW Shift to N
Displays when you attempt to switch out of 4X4 LOW and you do not shift the transmission to neutral (N)  
To Exit 4x4 LOW Slow to 3 MPH
Displays when you attempt to switch out of 4X4 LOW and your vehicle's speed is too fast.  
To Exit 4x4 LOW Slow to 5 km/h
Shift Delayed Pull Forward
Could display when there is a Transfer case gear tooth blockage while shifting to or from 4L or to the neutral state.  
Shift to Neutral
Displays when the system requires an additional transmission shift to neutral (N) to complete a transfer case shift.  
To Engage 4x4 Slow to 3 MPH
Displays when you command a 4x4 shift during conditions which are potentially harmful to the driveline components.  
To Engage 4x4 Slow to 5 km/h
To Engage 4x4 Release Accelerator Pedal
Displays when the 4x4 system requests you release the accelerator pedal to complete a 4x4 shift.   See   Using Four-Wheel Drive.   
For Improved Performance 4x4 Recommended
Displays when you command a drive mode change to Deep Snow/Sand and the vehicle is in 2H.  
To Exit 4x4 LOW Exit Rock Crawl Mode
Displays when you attempt to switch out of 4x4 LOW and Rock Crawl mode is engaged.  
To Enter Rock Crawl Mode 4x4 LOW is Required
Displays when you attempt to select Rock Crawl mode and 4x4 LOW is not engaged.  

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok