WARNING   WARNING:  Operating your vehicle with the traction control disabled could lead to an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.

The system automatically turns on each time you switch the ignition on.
If your vehicle is stuck in mud or snow, switching traction control off may be beneficial as this allows the wheels to spin.
Note:   For additional information on the traction and stability control systems. See  Using Stability Control . 
Switching the System Off
When you switch the system off or on, a message appears in the information display showing system status.
Use the traction and stability control switch on the instrument panel to switch the system off or on.
The switch illuminates when traction control is off.
When you place your vehicle into four-wheel drive low mode the traction control disables. Traction control resumes full operation when you put your vehicle back into two-wheel drive mode.
System Indicator Lights and Messages
Traction and Stability Control Flash  The stability and traction control light:
  • Temporarily illuminates on engine start-up.
  • Flashes when a driving condition activates either of the systems.
  • Illuminates if a problem occurs in either of the systems.
Traction and Stability OFF  The stability and traction control off light temporarily illuminates on engine start-up and stays on when you switch the traction control system off.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok