You can use the power door lock control or the remote control to lock and unlock your vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.
Power Door Lock/Unlock
AUnlock.
BLock.
Door Lock Indicator
 An LED on each door window trim illuminates when you lock the door. It remains on for up to 10 minutes after you switch the ignition off.
Door Lock Switch Inhibitor
When you electronically lock your vehicle, the power door lock switch no longer operates after 20 seconds. You must unlock your vehicle with the remote control or keyless keypad, or switch the ignition on, to restore function to these switches. You can switch this feature on or off in the information display.   See   General Information. 
Rear Door Unlocking and Opening
 Pull the interior door handle twice to unlock and open a rear door.The first pull unlocks the door and the second pull unlatches the door.
Remote Control
 You can use the remote control at any time.The luggage compartment release button only operates when your vehicle's speed is less than 5 mph (8 km/h).
Unlocking the Doors
Unlock Icon  Press the button to unlock the driver door.
Press the button again within three seconds to unlock all doors. The direction indicators flash.
Note:   If the system does not function, use the key blade to lock and unlock your vehicle.
Press and hold both the lock and unlock buttons on the remote control for three seconds to change between driver door or all doors unlock mode. The direction indicators flash twice to indicate a change to the unlocking mode. Driver door unlock mode only unlocks the driver door when the unlock button is pressed once. All door unlock mode unlocks all doors when the unlock button is pressed once. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access. You can also change the mode in the information display.   See   General Information. 
Reprogramming the Unlocking Function
Note:   When you press the unlock button, either all the doors are unlocked or only the driver door is unlocked.Pressing the unlock button again unlocks all the doors.
 Press and hold the unlock and lock buttons on the remote control simultaneously for at least four seconds with the ignition off. The direction indicators flash twice to confirm the change.
To return to the original unlocking function, repeat the process.
Locking the Doors
Lock Icon  Press the button to lock all doors. The direction indicators flash. Press the button again within three seconds to confirm that all the doors are closed. The doors lock again, the horn sounds and the direction indicators flash if all the doors and the luggage compartment are closed.
Note:   If the system does not function, use the key blade to lock and unlock your vehicle.
Mislock
If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the direction indicators do not flash. You can switch this feature on or off in the information display.   See   General Information. 
Opening the Luggage Compartment
Liftgate Ajar  Press twice within three seconds to open the luggage compartment.
Locking and Unlocking the Doors with the Key Blade
Locking the Doors
Intelligent Access Door Cap Remove
If the central locking function does not operate, lock the doors individually using the key in the position shown.
Left-Hand Side
Turn clockwise to lock.
Right-Hand Side
Turn counterclockwise to lock.
Unlocking the Doors
If the central locking function fails to operate, unlock the driver door and then unlock all other doors individually by pulling the interior door handles.
Note:   If the doors have been unlocked using this method, the doors must be locked individually until the central locking function has been repaired.
Activating Intelligent Access
General Information
You can unlock and lock the vehicle without taking the keys out of your pocket or purse when your intelligent access key is within 3 ft (1 m) of your vehicle. Intelligent access uses a sensor on the back of the door handle for unlocking and a separate sensor on the face of each door handle for locking.
The system does not function if:
  • Your vehicle battery has no charge.
  • The key battery has no charge.
  • The key frequencies are jammed.
Note:   The system may not function if the key is close to metal objects or electronic devices, for example keys or a cell phone.
Note:   If the system does not function, use the key blade to lock and unlock your vehicle.   See   Remote Control. 
Unlocking Using Intelligent Access
Unlocking Using Intelligent Access
With your intelligent access key within 3 ft (1 m) of your vehicle, touch the unlock sensor on the back of the door handle for a brief period and then pull on the door handle to unlock, being careful to not touch the lock sensor at the same time or pulling the door handle too quickly. The intelligent access system requires a brief delay to authenticate your intelligent access key fob.
Locking Using Intelligent Access
Locking Using Intelligent Access
With your intelligent access key within 3 ft (1 m) of your vehicle, touch the outer door handle lock sensor for approximately one second to lock, being careful to not touch the unlock sensor on the back of the door handle at the same time. After locking, you can immediately pull on the door handle to confirm locking occurred without inadvertently unlocking.
Opening the Luggage Compartment
Opening and Closing the Liftgate
Press the button located in the top of the liftgate pull cup handle to unlatch the liftgate, and then pull on the outside handle.
Smart Unlocks for Intelligent Access Keys
This helps to prevent you from locking your key inside the passenger compartment or rear cargo area.
When you electronically lock your vehicle with any door open, transmission in park (P) and the ignition off, the system searches for an intelligent access key in the passenger compartment after you close the last door. If the system finds a key, all of the doors immediately unlock and the horn sounds twice, indicating that a key is inside.
You can override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle. To do this, lock your vehicle after you have closed all the doors by:
  • Using the keyless entry keypad.
  • Pressing the lock button on another intelligent access key.
  • Touching the locking area on the handle with another intelligent access key in your hand.
When you open one of the front doors and lock your vehicle using the power door lock control, all doors lock then unlock if:
  • The ignition is on.
  • The ignition is off and the transmission is not in park (P).
Auto Relock
If you press the unlock button on the remote control and do not open a door within 45 seconds, your vehicle locks and the alarm arms. You can switch this feature on or off in the information display.   See   General Information. 
Autolock (If Equipped)
Autolock locks all the doors when:
  • All doors are closed.
  • The ignition is on.
  • You shift into any gear putting your vehicle in motion.
  • Your vehicle reaches a speed greater than
Autolock repeats when:
  • You open then close any door while the ignition is on and your vehicle speed is 9 mph (15 km/h) or lower.
  • Your vehicle reaches a speed greater than
Autounlock
Autounlock unlocks all the doors when:
  • The ignition is on, all the doors are closed, and your vehicle has been moving at a speed greater than 12 mph (20 km/h).
  • Your vehicle comes to a stop and you switch the ignition off or to the accessory position.
  • You open the driver door within 10 minutes of switching the ignition off or to accessory.
Note:   The doors do not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door.
Enabling or Disabling Autounlock
You can enable or disable the autounlock feature in the information display or an authorized dealer can do it for you.
Illuminated Entry
The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control.
The lamps turn off if:
  • The ignition is on.
  • You press the remote control lock button.
  • 25 seconds have elapsed.
The lamps do not turn off if:
  • You turn them on with the lamp control.
  • Any door is open.
Illuminated Exit
The interior lamps and some exterior lamps illuminate when all doors are closed, you switch the ignition off and you remove the key from the ignition.
The lamps turn off if all the doors remain closed and:
  • 25 seconds have elapsed.
  • You press the START/STOP button.
Battery Saver
If you leave the courtesy lamps, dome lamps or headlamps on, the battery saver shuts them off 10 minutes after you switch the ignition off.
Accessory Mode Battery Saver for Intelligent Access Keys
If you leave the ignition switched on, it shuts off once it detects a certain amount of battery drain, or after 45 minutes.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok