This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Changing a Bulb
WARNING:
Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury.
WARNING:
Bulbs can become hot. Let the bulb cool down before removing it. Failure to do so could result in personal injury. |
Use the correct specification bulb.
Install in the reverse order unless otherwise stated.
Headlamp
A Headlamp low beam.Headlamp low and high beam - vehicles with high-intensity discharge headlamps.B Headlamp high beam.Daytime running lamp.C Front direction indicator. |
Front Direction Indicator
- Remove the headlamp assembly. See Removing a Headlamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Headlamp Low Beam
- Remove the cover.
- Turn the bulb counterclockwise and remove it.
- Disconnect the electrical connector.
Note:
Do not touch the bulb glass.
Note:
You cannot separate the bulb from the bulb holder.
Headlamp High Beam
- Remove the cover.
- Turn the bulb counterclockwise and remove it.
- Disconnect the electrical connector.
Note:
Do not touch the bulb glass.
Note:
You cannot separate the bulb from the bulb holder.
High-Intensity Discharge Headlamps
These lamps operate at a high voltage.See an authorized dealer if they fail.
Daytime Running Lamp
- Remove the cover.
- Turn the bulb counterclockwise and remove it.
- Disconnect the electrical connector.
Note:
Do not touch the bulb glass.
Note:
You cannot separate the bulb from the bulb holder.
LED Lamps
LED lamps are not serviceable items. See an authorized dealer if they fail.
The following lamps are LED:- Brake and rear lamps.
- Central high mounted brake lamp.
- Front fog lamps.
- Front side marker lamps.
- Front signature lamps.
- Rear direction indicators.
- Rear side marker lamps.
- Reversing lamps.
- Side direction indicators.
License Plate Lamp
- Use a suitable tool, for example a screwdriver, to carefully remove the lamp.
- Remove the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Thank You For Your Feedback