Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
  • Component damage not covered by the vehicle Warranty.
  • Longer engine cranking periods.
  • Increased emission levels.
  • Reduced engine performance.
  • Reduced fuel economy.
  • Reduced brake performance.
Engine
Engine Oil
Capacities

Variant   Including the Oil Filter   Excluding the Oil Filter  
All.   6.4 L (1.4 gal)6.2 L (1.4 gal)

Note:   The quantity of engine oil required to raise the indicated level on the dipstick from minimum to maximum is 2 L (0.4 gal).

Materials

NameSpecification
Engine Oil - SAE 0W-30WSS-M2C950-A
 
If you are unable to find an engine oil that meets the specification defined by WSS-M2C950-A, it is acceptable to use a SAE 0W-30 engine oil that is defined by ACEA C2.
Note:   Do not use more than 1 L (0.2 gal) of the alternative engine oil between scheduled service intervals.
Engine Coolant
Capacities

Variant   Quantity  
Vehicles without a fuel fired heater or an auxiliary heater.   10.7 L (2.4 gal)
Vehicles with a fuel fired heater.   11.4 L (2.5 gal)
Vehicles with an auxiliary heater.   12 L (12.68 qt)
Vehicles with a fuel fired heater and an auxiliary heater.   12.7 L (13.42 qt)

Materials

NameSpecification
AntifreezeWSS-M97B44-D
 
Fuel Tank
Capacities

Variant   Quantity  
Front wheel drive.   63 L (13.9 gal)
All-wheel drive.   61 L (13.4 gal)

Diesel Exhaust Fluid (AdBlue) Tank
Capacities

Variant   Quantity  
All.   12.4 L (2.7 gal)

Washer Reservoir
Capacities

Variant   Quantity  
Washer system fill capacity.   4.5 L (1.0 gal)

Materials

NameSpecification
Windshield Washer FluidWSS-M14P19-A
 
Brake System

Materials

NameSpecification
Brake FluidWSS-M6C65-A2
 

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok