WARNING:
You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death. WARNING: Always drive with due care and attention when using and operating the controls and features on your vehicle. WARNING: In cold and severe weather conditions the system may not function. Rain, snow and spray can all limit sensor performance. WARNING: The system will not operate if the sensor cannot track the road lane markings. WARNING: The sensor may incorrectly track lane markings as other structures or objects. This can result in a false or missed warning. WARNING: Large contrasts in outside lighting can limit sensor performance. WARNING: The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction. WARNING: If damage occurs in the immediate area surrounding the sensor, have your vehicle checked as soon as possible. WARNING: The system may not correctly operate if your vehicle is fitted with a suspension kit not approved by us. |
Press the button to switch the system on or off. The button is above the audio unit or on the center console. |
ANormal BIncreased |
Why is the feature not available (line markings are gray) when I can see the lane markings on the road? |
---|
Your vehicle speed is outside the operational range of the feature. |
The sun is shining directly into the camera lens. |
A quick intentional lane change has occurred. |
Your vehicle stays too close to the lane markings. |
Driving at high speeds in curves. |
The last feature activation occurred a short time ago. |
Ambiguous lane markings, for example in construction zones. |
Rapid transition from light to dark, or from dark to light. |
Sudden offset in lane markings. |
ABS or AdvanceTrac™ is active. |
There is a camera blockage due to dirt, grime, fog, frost or water on the windshield. |
You are driving too close to the vehicle in front of you. |
Transitioning between no lane markings to lane markings or vice versa. |
There is standing water on the road. |
Faint lane markings, for example partial yellow lane markings on concrete roads. |
Lane width is too narrow or too wide. |
No one calibrated the camera after replacing the windshield. |
Driving on tight roads or on uneven roads. |
Vehicle accessories are blocking the camera, for example a snowplow. |
Thank You For Your Feedback