You can use the power door lock control or the remote control to lock and unlock your vehicle.
Note:   Do not use the door latch assembly to attach any accessory, such as handles or steps, as this can cause damage to your vehicle.
Power Door Locks (If Equipped)
The power door lock control is on the driver and front passenger door panels.
Power Door Lock Control Switch
ALock.
BUnlock.
Remote Control (If Equipped)
You can use the remote control at any time when the ignition is off.
Unlocking the Doors (Two-Stage Unlock)
Unlock Icon  Press the button to unlock the driver door.
Press the button again within three seconds to unlock all doors.The direction indicators flash.
Note:   The driver door can be unlocked with the key if the remote control is not functioning.
Note:   When you leave your vehicle unattended for several weeks, the remote control turns off.Your vehicle must be unlocked and started.Unlocking and starting your vehicle once enables the remote control.
Reprogramming the Unlocking Function
Note:   When you press the unlock button, either all the doors are unlocked or only the driver door is unlocked.Pressing the unlock button again unlocks all the doors.
You can reprogram the unlocking function so that only the driver door is unlocked.
 Press and hold the unlock and lock buttons on the remote control simultaneously for at least four seconds with the ignition off. The direction indicators flash twice to confirm the change.
To return to the original unlocking function, repeat the process.
Locking the Doors
Lock Icon   Press the button to lock all doors.The direction indicators flash.
 Press the button again within three seconds to confirm that all the doors are closed.The doors lock again, the horn sounds and the direction indicators flash if all the doors are closed.
Note:   If any door is open, the horn sounds twice and the direction indicators do not flash.
Autolock
Autolock locks all the doors when all of the following occur:
  • All doors are closed.
  • The ignition is on.
  • The vehicle reaches a speed greater than 12 mph (20 km/h).
Autolock repeats when:
  • The vehicle is stopped.
  • Any door opens and closes while the ignition is on.
  • The vehicle reaches a speed greater than 12 mph (20 km/h).
Autounlock
Autounlock unlocks all the doors when all of the following occur:
  • All the doors are closed and your vehicle is moving at a speed greater than 12 mph (20 km/h).
  • Your vehicle comes to a stop.
  • You open the driver door within 10 minutes of switching the ignition off or to the accessory position.
Note:   If you open the driver door after 10 minutes, autounlock does not unlock all other doors.
Enabling or Disabling Autounlock (If Equipped)
You can enable or disable the autounlock feature in the instrument cluster display or an authorized dealer can do it for you.
To enable or disable autounlock, do the following:
  1. Switch the ignition on.
  1. Press the power door unlock control three times.
  1. Switch the ignition off.
  1. Press the power door unlock control three times.
  1. Switch the ignition on.The horn sounds indicating your vehicle is in programming mode.
  1. Press the power door lock control and within five seconds, press the power door unlock control.The horn sounds once if disabled or twice if enabled.
  1. Switch the ignition off. The horn sounds indicating programming is complete.
Note:   You can also switch this feature on or off using the instrument cluster display.   See   Information Displays. 
Illuminated Entry
The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control.
The lamps turn off if:
  • The ignition is on.
  • You press the lock button on the remote control.
  • 25 seconds have elapsed.
The lamps do not turn off if:
  • You switch them on with the lighting control.
  • Any door is open.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok