Message   Description  
Detecting Trailer Please Wait…
Displays when the system turns on and is initializing.  
Pro Trailer Backup Assist™ System is Not Available
A condition exists that prevents the system from turning on. If the message continues to display, visit your authorized dealer to have your vehicle checked.  
Trailer Reverse Guidance System is Not Available
Pro Trailer Backup Assist™ Driving Required to Initialize Steering Press Knob to Exit
The steering system needs to learn internal parameters to fully enable the feature. Drive your vehicle straight forward above 25 mph (40 km/h) for approximately 5 minutes.  
Trailer Reverse Guidance Driving Required to Initialize Steering Press OK to Exit
Pro Trailer Backup Assist™ Stop now Maximum trailer angle Press Knob to Exit
Displays when you reach the maximum controllable trailer angle for the system. Place your vehicle in drive (D) and pull forward to get the truck and trailer back to an in-line position.   If this message consistently displays, you may need to repeat the trailer calibration. Delete the trailer from the system and repeat the setup and calibration process.  
Stop now. Deactivated by trailer angle.
Displays when you exceed the maximum controllable trailer angle for the system. Place your vehicle in drive (D) and pull forward to get your vehicle and trailer back to an in-line position, then activate the system by selecting the connected trailer and following the instructions on the touchscreen.   If this message consistently displays, you may need to repeat the trailer setup and calibration. Delete the trailer from the system and repeat the setup and calibration process.  
Pro Trailer Backup Assist™ Stop Now Take Control of Steering Wheel
Displays when the system can no longer steer the vehicle and you must take over steering.  
Pro Trailer Backup Assist™ Sensor Not Detected Refer to Owner's Manual Press Knob to Exit
Displays when the system does not detect the sensor. Check the sensor connection, that there is no damaged wiring between the connector and sensor and that there is only one sensor connected.  
Trailer Reverse Guidance Sensor Not Detected Refer to Owner's Manual Press OK to Exit
Pro Trailer Backup Assist™ Trailer Not Detected. Shift to Park Press Knob to Exit
These messages display when the system does not detect the trailer. Check that the sensor is correctly installed and the trailer length is within the allowed range.   If these messages continue to display, visit your authorized dealer to have your vehicle checked.  
Pro Trailer Backup Assist™ Trailer Not Detected. Refer to Owner's Manual. Press Knob to Exit
Trailer Reverse Guidance Trailer Not Detected. Refer to Owner's Manual. Press OK to Exit
Pro Trailer Backup Assist™ Trailer Not Detected Pull Forward to Initialize Press Knob to Exit
These messages display when your vehicle has not moved after the trailer sensor is connected or extended operation below 1 mph (1 km/h). Drive forward above 2 mph (3 km/h) to initialize the system.  
Trailer Reverse Guidance Trailer Not Detected Pull Forward to Initialize Press OK to Exit
Pro Trailer Backup Assist™ Stop Now System Not Active Press Knob to Exit
Displays when your vehicle is backing up but the system is not activated. Select the connected trailer on the touchscreen and follow the instructions to activate the system.   This message also displays when you back up during the calibration process.  
Pro Trailer Backup Assist™ Backup Slowly Turn Knob to Steer Press Knob to Exit
Displays when the system turns on and is available to use.  

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok