Note:
You cannot use the pickup bed ramps with the tailgate work surface or tailgate step.
Installing the Bed Ramp
- Remove the front and rear cables.
- Open the cam lever arms and unscrew the cam bolts.
- Remove the ramp from the ramp holder.
- Rotate the stops at the underside of the ramp to the open position.
Note:
You can use a smooth surface tool to rotate the stops.
- Slide the ramp claw onto the tailgate plate.
- Pull the location pin outward and extend the ramp until the pin is seated in the usage position, then set the ramp on even ground.
Removing the Ramp
Remove in the reverse order.