Opening and Closing the Windows
WARNING:
Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury.
WARNING:
When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings. |
Press the control to open the window. Lift the control to close the window.
Note:
The power windows operate with the ignition on, and for several minutes after you switch the ignition off or until you open a front door.
To reduce wind noise or pulsing noise when one window is open, slightly open the opposite window.
One-Touch Open
Fully press the control and release it. Press again or lift it to stop the window.
One-Touch Close
Fully lift the control and release it. Press again or lift it to stop the window.
Resetting One-Touch Close
- Lift and hold the switch until the window is fully closed.
- Release the switch.
- Lift the switch again for one more second.
- Release the switch.
- Lift the switch again for one more second.
Note:
Repeat the procedure if the window does not close when you use one-touch.
Bounce-Back
The window stops and reverses if it detects an obstruction while closing.
Overriding Bounce-Back
WARNING:
If you override bounce-back, the window does not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle. |
- Close the window until it reaches the point of resistance and let it reverse.
- Close the window a third time to the point of resistance.Bounce-back is now disabled and you can close the window manually.
Note:
The window goes past the point of resistance and you can fully close it.
Note:
If the window does not close, have your vehicle checked as soon as possible.
Resetting Bounce-Back
WARNING:
Bounce-back is off until you reset the memory. Take care when closing the windows to avoid personal injury or damage to your vehicle. |
- Lift and hold the switch until the window is fully closed.
- Release the switch.
- Lift the switch again for one more second.
- Release the switch.
- Lift the switch again for one more second.
Note:
Repeat the procedure if the window does not close when you use one-touch.
Note:
If you have disconnected the battery, you must reset the bounce-back memory.