The battery is under the driver seat.
Note:   If you have power seats and the battery has no charge, jump-start your vehicle to move the seat.   See   Jump Starting the Vehicle - 2.0L EcoBlue. 
Removing the Battery
Remove Battery Cover Trim
  1. Fully raise the driver seat and move it fully forward. Pull the tabs upward and remove the cover.
Note:   Your vehicle may not have this cover.
Remove Battery Cover Seat
  1. Unhook the cover and tuck it under the seat.
Remove Battery Seat Track Cover
  1. Remove both seat track end caps.
Note:   Your vehicle may not have these end caps.
  1. Remove both seat adjustment end stop bolts at the front of the seat.
Remove Battery Cover
  1. Remove the battery clamp and cover bolts.
  1. Remove the battery clamp and cover.
Remove Battery Terminal Cover
  1. Remove the battery terminal cover and remove the negative (-) terminal.
Note:   Single batteries could be mounted the opposite way around in the battery tray. The negative terminal is toward the rear of your vehicle.
Remove Battery Cable Clips
  1. Release the retaining clips and remove the cover.
  1. Remove the cable securing clips from the cover.
Remove Battery Terminals
  1. Remove the positive (+) terminal and remove the battery.
Note:   Batteries are heavy.
  1. Move the second battery toward the rear of your vehicle and remove the negative (-) terminal.
  1. Remove the positive (+) terminal and remove the battery.
Replacing the Battery
WARNING   WARNING:  Make sure that you securely fasten the seat runner bolts before installing the covers.

You must replace the battery with one of exactly the same specification.
To install, reverse the removal procedure.
Note:   Make sure that you correctly install the battery terminal covers, battery cover and battery cable clips.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok