Vertical Aim Adjustment
If your vehicle has been involved in a crash, have the aim of the headlamp beam checked by an authorized dealer.
Headlamp Aiming Target
Adjust Headlamps Vertically
A8 ft (2.4 m)
BGround to the center of the headlamp low beam bulb
C25 ft (7.6 m)
DHorizontal reference line
Vertical Aim Adjustment Procedure
  1. Park your vehicle on level ground approximately 25 ft (7.6 m) from a wall or screen.
  1. Measure the distance from the ground to the center of the headlamp low beam bulb and mark an 8 ft (2.4 m) long horizontal reference line on the wall or screen at this height.
Headlamp Aim Identifiers
Note:   There may be an identifying mark on the lens to help you locate the center of the bulb.
Note:   To see a clearer light pattern while adjusting one headlamp, you may want to block the light from the other headlamp.
  1. Switch on the low beam headlamps and open the hood.
Headlamp Beam Vehicle Off Road Pattern
  1. On the wall or screen you will observe a flat zone of high intensity light located at the top of the beam pattern. If the top edge of the flat zone of high intensity light is not on the horizontal reference line, adjust the aim of the headlamp beam.
Vertical Aim Adjuster Location
  1. Locate the vertical adjuster on each headlamp.Use a suitable tool, for example a screwdriver or hexagonal socket, to turn the adjuster clockwise or counterclockwise to adjust the vertical aim of the headlamp.The horizontal edge of the brighter light should touch the horizontal reference line.
  1. Close the hood and switch off the lamps.
Horizontal Aim Adjustment
The horizontal aim of the headlamp beam on your vehicle is not adjustable.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok