Maintenance - Removing a Headlamp

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Removing a Headlamp

WARNING: Switch all of the lamps and the ignition off. Failure to follow this warning could result in serious personal injury.

Open the hood. See Opening and Closing the Hood.

Remove the screws.

Pull the headlamp toward the front of your vehicle to disengage it from its locating points and then lift the headlamp up.

Disconnect the electrical connectors.

Note: When you install the headlamp, make sure that you correctly attach the electrical connector.

Note: When you install the headlamp, make sure that you correctly engage its locating points.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

2020 Transit Owner's Manual