Alarm System
Your vehicle may have one of the following alarm systems:
  • Category one alarm with interior sensors and battery back-up sounder.
  • Perimeter alarm.
Perimeter Alarm
The perimeter alarm is a deterrent against unauthorized access to your vehicle through the doors and the hood.
Interior Sensors (If Equipped)
Interior Motion Sensors
Note:   Do not cover up the interior scanning sensors.
The sensors act as a deterrent against unauthorized intrusion by sensing any movement within your vehicle.
Battery Back-up Sounder
The battery back-up sounder is an additional alarm system this will sound a siren when the alarm is triggered. When you lock your vehicle the system is armed. The sounder has its own battery and will sound an alarm siren even if someone disconnects your vehicle battery or the battery back-up sounder itself.
Triggering the Alarm
Once armed, the alarm is triggered in any of the following ways:
  • If someone opens a door or the hood without a valid key or remote control.
  • If you switch the ignition on without a valid key.
  • If the interior sensors detect movement within your vehicle.
  • On vehicles with a battery back-up sounder, if someone disconnects your vehicle battery or the battery back-up sounder itself.
If the alarm is triggered, the alarm horn will sound for 30 seconds and the hazard warning flashers will flash for five minutes.
Any further attempts to perform one of the above will trigger the alarm again.
Guard Settings
Note:   Do not arm the alarm with full guard if passengers, animals or other moving objects are inside your vehicle, as this could trigger the alarm.

Message   Description  
Full guard
The interior sensors are on when you arm the alarm.  
Reduced
The interior sensors are off when you arm the alarm. You can set the alarm to reduced guard for the current ignition cycle only. The alarm will reset to full guard the next time you switch the ignition on.  
Ask on exit
You can set the information display to ask you each time which level of guard you wish to set.   A message appears in the information display each time you switch the ignition off. If you wish to arm the alarm with reduced guard, press the OK button when this message appears. If you wish to arm the alarm with full guard, leave your vehicle without pressing the OK button.  

Selecting Full or Reduced Guard
Note:   Selecting reduced guard does not set the alarm permanently to reduced guard. It sets it to reduced guard only for the current ignition cycle. If you regularly set the alarm to reduced guard, select the option to ask when you exit.
You can select full or reduced guard using the information display.   See   Information Displays
Arming the Alarm
To arm the alarm, lock your vehicle.   See   Doors and Locks
Disarming the Alarm
Disarm and silence the alarm by unlocking the doors and switching your vehicle on or by unlocking the doors or the liftgate with the remote control.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok