Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage not covered by the vehicle Warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Air Conditioning System
WARNING:
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. |
Capacities
Variant
| Refrigerant
| Refrigerant Oil
|
---|
Vehicles with rear air conditioning.
| 39.2 oz (1.11 kg) | 9.5 fl oz (280 ml) |
Vehicles without rear air conditioning.
| 28.2 oz (0.8 kg) | 5.4 fl oz (160 ml) |
Materials
Name | Specification |
---|
Refrigerant - R-134A | WSH-M17B19-A
|
Refrigerant Oil | WSH-M1C231-B
|
Engine
Engine Oil
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricants Specification Advisory Committee (ILSAC).
We recommend Motorcraft® motor oil for your vehicle.If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SP requirements and display the API Certification Mark for gasoline engines.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by the vehicle Warranty.
Capacities
Variant
| Including the Oil Filter
|
---|
All.
| 6.0 qt (5.7 L) |
Note:
The quantity of engine oil required to raise the indicated level on the dipstick from minimum to maximum is
1.0 qt (0.9 L).
Materials
Name | Specification |
---|
Engine Oil - SAE 5W-30 | WSS-M2C961-A1
|
Note:
Do not use more than
0.3 gal (1 L) of the alternative engine oil between scheduled service intervals.
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil where the ambient temperature reaches
-22 °F (-30 °C) or below.
Materials
Name | Specification |
---|
Engine Oil - SAE 0W-30 | WSS-M2C963-A1
|
Engine Coolant
Capacities
Variant
| Quantity
|
---|
Vehicles with auxiliary heater.
| 16.4 qt (15.5 L) |
Vehicles without auxiliary heater.
| 14.9 qt (14.1 L) |
Materials
Name | Specification |
---|
Antifreeze | WSS-M97B57-A2
|
Fuel Tank
Capacities
Variant
| Quantity
|
---|
Vehicles with standard fuel tank.
| 25.1 gal (95 L) |
Vehicles with larger fuel tank.
| 30.5 gal (115.4 L) |
Washer Reservoir
Capacities
Variant
| Quantity
|
---|
All.
| 4.8 qt (4.5 L) |
Materials
Name | Specification |
---|
Windshield Washer Fluid | WSS-M14P19-A
|
Brake System
Materials
Name | Specification |
---|
Brake Fluid | WSS-M6C65-A2
|
Rear Axle
Capacities
Variant
| Quantity
|
---|
Rear axle fluid, vehicles with limited slip differential.
| 2.9 qt (2.72 L) |
Rear axle fluid, vehicles with conventional differential.
| 3.0 qt (2.84 L) |
Rear axle friction modifier.
| 0.1 qt (118 ml) |
Note:
Ford rear axles contain a synthetic lubricant that does not require changing unless you submerge the axle in water.
Materials
Name | Specification |
---|
Gear/Transmission Fluid - SAE 75W-85 | WSS-M2C942-A
|
Friction Modifier | EST-M2C118-A
|
Locks
Materials
Name | Specification |
---|
Penetrating Fluid | -
|
Grease
Materials
Name | Specification |
---|
Grease | ESA-M1C75-B
|