This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Using Power Running Boards
WARNING:
In extreme climates, excessive ice buildup may occur, causing the running boards not to deploy. Make sure that the running boards have deployed, and have finished moving before attempting to step on them. The running boards will resume normal function once the blockage is cleared.
WARNING:
Switch off the running boards before jacking or placing any object under your vehicle. Never place your hand between the extended running board and your vehicle. A moving running board may cause injury. |
Note:
Do not use the power running boards, front and rear hinge assemblies, running board motors or the running board underbody mounts to lift your vehicle when jacking. Always use proper jacking points.
Note:
The power running boards may operate more slowly in cool temperatures.
Note:
The running board mechanism may trap debris such as mud, dirt, snow, ice and salt. This may cause unwanted noise. If this happens, manually set the power running boards to the deployed position. Then wash the system in particular the front and rear hinge arms with a high-pressure car wash wand.
Note:
If you drive off when the power running boards are deployed the engine may stop.
Note:
In the event of a malfunction you can stow the power running boards manually.
Automatic Power Deploy
The power running board extends when you open the door.
Automatic Power Stow
When you close the door, the power running board returns to the stowed position after a two-second delay.
Manual Power Deploy
To set the power running boards to the deployed position, use the information display controls on the steering wheel to select the following:
| Message | Action |
|---|---|
Settings | Press the menu button. |
Vehicle Settings | Press the OK button. |
Power Steps | Press the OK button. |
Out | Press the OK button. |
Enabling and Disabling
To enable or disable the power running board feature, use the information display controls on the steering wheel to select the following:
| Message | Action and Description |
|---|---|
Settings | Press the menu button. |
Vehicle Settings | Press the OK button. |
Power Steps | Press the OK button. |
| Select one of the following: | |
Off | Press the OK button.When disabled the power running boards move to the stowed position regardless of the door position. |
Auto | Press the OK button.When enabled the power running boards move to the correct position based on the door position. |
When you switch the ignition on, the system turns on.
Bounce-back
The running board will reverse direction and move to the end of travel if it encounters an object while moving.
Manual Operation
If the power running board does not return to the stowed position, you can manually stow it.
Insert the lug wrench into the guide hole and turn the handle clockwise until the running board is in the stowed position.
Resetting the System
You can reset the system by opening and closing the sliding door.
Thank You For Your Feedback