Cleaning the Exterior - Cleaning Stripes or Graphics

This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Cleaning Stripes or Graphics

It is recommended to wash your vehicle by hand however, pressure washing may be used under the following conditions:

Use a spray with a 40° wide spray angle pattern.
Keep the nozzle at a 12 in (30 cm) distance and 90° angle to your vehicle's surface.
Do not use water pressure higher than 1450 psi (10,000 kPa).
Do not use water hotter than 167°F (75°C).

Note: Holding the pressure washer nozzle at an angle to the vehicle's surface may damage graphics and cause the edges to peel away from the vehicle's surface.

2021 Mustang Mach-E Owner's Manual