WARNING   WARNING:  Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury.
WARNING   WARNING:  When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings.

Power Window Switch   Press the window control switch to open the window. Lift the window control switch to close the window.
Note:   The power windows operate with the ignition on, and for several minutes after you switch the ignition off or until you open a front door.
To reduce wind noise or pulsing noise when one window is open, slightly open the opposite window.
One-Touch Open
Fully press the window control switch and release it. Press again or lift it to stop the window.
One-Touch Close
Fully lift the window control switch and release it. Press again or lift it to stop the window.
Resetting One-Touch Close
Carry out all steps within 30 seconds of starting the sequence.
  1. Close the window.
  1. Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
  1. Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
  1. Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
  1. Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
Note:   Repeat the procedure if the window does not close when you use one-touch.