Automatic High Beam Control - Automatic High Beam Control Limitations

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Automatic High Beam Control Limitations

The system turns the high beams off if any of the following occur:

You switch the system off.
You set the lighting control to any position except autolamps.
The ambient light level is high enough that you do not require high beams.
The system detects an approaching vehicle's headlamps or a leading vehicle's tail lamps.
The system detects severe rain, snow or fog.
The system detects street lighting.
The camera has reduced visibility.
The vehicle speed falls below approximately 19 mph (30 km/h).

Note: The deactivation speed may be lower on curves.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Mustang Mach-E Owner's Manual