Automatic High Beam Control - Automatic High Beam Control Requirements

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Automatic High Beam Control Requirements

The system turns the high beams on if all of the following occur:

You switch the system on.
You set the lighting control to the autolamps position.
The ambient light level is low enough that you require high beams.
There is no traffic in front of your vehicle.
The vehicle speed is greater than approximately 25 mph (40 km/h).

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Mustang Mach-E Owner's Manual