Vehicle Identification - Installing the Vehicle Identification Card

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Installing the Vehicle Identification Card

Install any devices that use radio frequency identification, for example, toll readers or vehicle identification cards, to the specified area on the windshield.

Note: Follow the vehicle identification card provider's installation instructions.

Note: When installing the radio frequency identification device, do not block objects such as the rain sensor and the auto-dimming sensor.

Place the device on the windshield, within one of the shaded areas at either side of the mirror.

Note: The device must be placed in the defined areas shown. The remainder of the windshield has a coating that prevents the device from working properly.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Mustang Mach-E Owner's Manual