You can use the power door lock control or the remote control to lock and unlock your vehicle.
Note:   Do not use the door latch assembly to attach any accessory, such as handles or steps, as this can cause damage to your vehicle.
Note:   Always take your keys and lock all doors when leaving your vehicle.
Power Door Locks
The power door lock controls are on the driver and front passenger door panels.
Locking and Unlocking Door Buttons
AUnlock.
BLock.
Remote Control
Unlocking the Doors (Two-Stage Unlock)
Unlock Icon  Press the button to unlock the driver door.
 Press the button again within three seconds to unlock all doors.The direction indicators flash.
To change between driver door or all door unlock mode, with the ignition off, press and hold both the lock and unlock buttons on the remote control for three seconds to change between driver door or all door unlock mode.The direction indicators flash twice to indicate a change to the unlocking mode. Driver door mode only unlocks the driver door when you press the unlock button once. All door mode unlocks all doors when you press the unlock button once. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access.
Locking the Doors
Lock Icon   Press the button to lock all doors.The direction indicators flash.
 Press the button again within three seconds to confirm that all the doors have closed.The doors lock again, the horn sounds and the direction indicators flash if all the doors and the luggage compartment have closed.
Mislock
If any door or the liftgate is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the direction indicators do not flash.
Opening a Rear Door from the Inside
 Pull the interior door handle twice to unlock and open a rear door. The first pull unlocks the door and the second pull opens the door.
Activating Intelligent Access (If Equipped)
General Information
You can unlock and lock the vehicle without taking the keys out of your pocket or purse when the passive key is within 3 ft (1 m) of your vehicle. Intelligent access uses a sensor on the back of the door handle for unlocking and a separate sensor on the face of each door handle for locking.
The system does not function if:
  • Your vehicle battery has no charge.
  • The key battery has no charge.
  • The key frequencies are jammed.
Note:   The system may not function if the passive key is close to metal objects or electronic devices, for example keys or a cell phone.
Note:   If the system does not function, use the key blade to lock and unlock your vehicle.   See   Remote Control
Unlocking Using Intelligent Access
Unlocking Using Passive Entry
With the passive key within 3 ft (1 m) of your vehicle, touch the unlock sensor on the back of the door handle for a brief period and then pull on the door handle to unlock, being careful to not touch the lock sensor at the same time or pulling the door handle too quickly. The intelligent access system requires a brief delay to authenticate the passive key.
Locking Using Intelligent Access
Lock the Car (Passive Entry Passive Start System)
With the passive key within 3 ft (1 m) of your vehicle, touch the outer door handle lock sensor for approximately one second to lock, being careful to not touch the unlock sensor on the back of the door handle at the same time. After locking, you can immediately pull on the door handle to confirm locking occurred without inadvertently unlocking.
Smart Unlocks for Integrated Keyhead Transmitter (If Equipped)
This helps to prevent you from locking yourself out of your vehicle if the key is still in the ignition.
When you open one of the front doors and lock your vehicle with the power door lock control, all the doors lock then unlock and the horn sounds twice if the key is still in the ignition.
You can still lock your vehicle with the key in the ignition by either:
  • Using the keyless entry keypad with the driver door closed.
  • Pressing the lock button on the remote control, even if you have not closed the doors.
If you have closed both front doors, you can lock your vehicle by any method, regardless of whether the key is in the ignition or not.
Smart Unlocks for Passive Keys (If Equipped)
 This feature helps to prevent you from locking the passive key inside your vehicle's passenger compartment or rear cargo area. When you electronically lock your vehicle with any door open, the transmission in park (P) and the ignition off, the system searches for a passive key inside your vehicle after you close the last door.If the system finds a key, all the doors immediately unlock and the horn sounds twice, indicating that a key is inside.
When you open one of the front doors and lock your vehicle using the power door lock control, all doors lock then unlock if the ignition is on.
Autolock (If Equipped)
Autolock locks all the doors when:
  • All doors have closed.
  • Your vehicle reaches a speed greater than 4 mph (7 km/h).
  • The ignition is on.
  • You shift into any gear putting your vehicle in motion.
Autolock repeats when:
  • You open, then close any door while the ignition is on and your vehicle speed is 4 mph (7 km/h) or lower.
  • Your vehicle reaches a speed greater than 4 mph (7 km/h).
Autounlock
Autounlock unlocks all the doors when:
  • The ignition is on, all the doors have closed, and your vehicle has been moving at a speed greater than 7 mph (12 km/h).
  • Your vehicle comes to a stop and you switch the ignition off or to the accessory position.
  • You open the driver door within 10 minutes of switching the ignition off or to accessory.
Note:   The doors do not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door.
Enabling or Disabling Autounlock
To enable or disable autounlock, see an authorized dealer.
Auto Relock
If you press the unlock button on the remote control and do not open a door within 45 seconds, your vehicle locks and the alarm arms.
Illuminated Entry
The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control.
The illuminated entry system turns off the lights if:
  • The ignition is on.
  • You press the remote control lock button.
  • After twenty-five seconds of illumination.
The lights do not turn off if:
  • You turn them on with the lamp control.
  • Any door is open.
Illuminated Exit
The interior lamps and some exterior lamps illuminate when all doors have closed and you switch the ignition off.
The lamps turn off if all the doors remain closed and:
  • Twenty-five seconds have elapsed.
  • You lock your vehicle from the outside.
Battery Saver
If you leave the courtesy lamps, interior lamps or headlamps on, the battery saver shuts them off 10 minutes after you switch the ignition off.
Accessory Mode Battery Saver for Passive Keys (If Equipped)
If you leave the ignition on after leaving your vehicle, it turns off 15 minutes after you close all of the doors.