WARNING   WARNING:  You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
WARNING   WARNING:  Always drive with due care and attention when using and operating the controls and features on your vehicle.
WARNING   WARNING:  In cold and severe weather conditions the system may not function. Rain, snow and spray can all limit sensor performance.
WARNING   WARNING:  The system will not operate if the sensor cannot track the road lane markings.
WARNING   WARNING:  The sensor may incorrectly track lane markings as other structures or objects. This can result in a false or missed warning.
WARNING   WARNING:  Large contrasts in outside lighting can limit sensor performance.
WARNING   WARNING:  The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction.
WARNING   WARNING:  If damage occurs in the immediate area surrounding the sensor, have your vehicle checked as soon as possible.
WARNING   WARNING:  The system may not correctly operate if your vehicle is fitted with a suspension kit not approved by us.

Note:   The system works above 40 mph (64 km/h).
Note:   The system works as long as the camera can detect one lane marking.
Note:   The system may not function with a blocked camera, or with a damaged or dirty windshield.
Note:   When you select aid or both modes and the system detects no steering activity for a short period, the system alerts you to put your hands on the steering wheel. The system may detect a light grip or touch on the steering wheel as hands off driving.
Rear View Mirror Camera
When you switch the system on and it detects an unintentional drift out of your lane is likely to occur, the system notifies or assists you to stay in your lane through the steering system and information display. In Alert mode, if your vehicle comes with it, the system provides a warning by vibrating the steering wheel. In Aid mode, the system provides steering assistance by gently counter steering your vehicle back into the lane.
When the system is functioning in the combined Alert and Aid mode, the system first provides steering assistance by gently counter steering your vehicle back into the lane, followed by a warning by vibrating the steering wheel if the vehicle is still out of the lane markings.
Switching the System On and Off
Lane Departure Warning Switch
Press the button on the direction indicator stalk to switch the system on or off.
Note:   The system on or off setting remains stored until you manually change it unless the system detects a MyKey. If the system detects a MyKey, it defaults to on and the mode sets to alert, if your vehicle comes with it.
System Settings
The system allows you to change the Mode and Intensity settings.   See   Settings.  The system stores the last-known selection for each of these settings. You do not need to readjust your settings each time you switch on the system.
Mode: This setting allows you to select which of the system features you can enable.
Lane Keeping Assist Alert
Alert only, if your vehicle comes with it – Provides a steering wheel vibration when the system detects an unintended lane departure.
Lane Keeping System Aid
Aid only – Provides steering assistance toward the lane center when the system detects an unintended lane departure.
Lane Keeping System Alert and Aid
AAlert.
BAid.
Alert + Aid – Provides steering assistance toward the lane center.
If your vehicle continues drifting out of the lane after the lane keeping aid corrects the vehicle, the system provides a steering wheel vibration.
Note:   The alert and aid diagrams illustrate general zone coverage. They do not provide exact zone parameters.
Intensity: This setting affects the intensity of the steering wheel vibration used for the alert, if your vehicle comes with it, and alert + aid modes. This setting does not affect the aid mode.
  • Low.
  • Normal.
  • High.
System Display
Lane Keeping System Display
If you switch the system on, a graphic with lane markings appears in the information display.
Note:   Graphics can vary depending on the instrument cluster available in your vehicle.
Lane Keeping Assist Display
If you have adaptive cruise control enabled and you are following a vehicle, additional graphics appear in the display.
When you switch off the system, the lane marking graphics do not display.
When the system is on, the color of the lane markings changes to indicate the system status.
Gray: Indicates that the system is temporarily unable to provide a warning or intervention on the indicated side. This may be because:
  • Your vehicle is under the activation speed.
  • The direction indicator is active.
  • Your vehicle is in a dynamic maneuver.
  • The road has no or poor lane markings in the camera field-of-view.
  • You have a blocked camera, or it is unable to detect the lane markings due to environmental, traffic or vehicle conditions. For example, significant sun angles, shadows, snow, heavy rain or fog, following a large vehicle that is blocking or shadowing the lane or poor headlamp illumination.
See Troubleshooting for additional information.
Green: Indicates that the system is available or ready to provide a warning or intervention, on the indicated side.
Yellow or Animated Graphics: Indicate that the system is providing or has just provided a lane keeping aid intervention.
Red: Indicates that the system is providing or has just provided a lane keeping alert warning.
You can temporarily suppress the system at any time by the following:
  • Quick braking.
  • Fast acceleration.
  • Using the direction indicator.
  • Evasive steering maneuver.
  • Driving too close to the lane markings.
Troubleshooting

Why is the feature not available (line markings are gray) when I can see the lane markings on the road?  
Your vehicle speed is outside the operational range of the feature.  
The sun is shining directly into the camera lens.  
A quick intentional lane change has occurred.  
Your vehicle stays too close to the lane markings.  
Driving at high speeds in curves.  
The last alert warning or aid intervention occurred a short time ago.  
Ambiguous lane markings, for example in construction zones.  
Rapid transition from light to dark, or from dark to light.  
Sudden offset in lane markings.  
ABS or AdvanceTrac™ is active.  
There is a camera blockage due to dirt, grime, fog, frost or water on the windshield.  
You are driving too close to the vehicle in front of you.  
Transitioning between no lane markings to lane markings or vice versa.  
There is standing water on the road.  
Faint lane markings, for example partial yellow lane markings on concrete roads.  
Lane width is too narrow or too wide.  
The camera has not been calibrated after a windshield replacement.  
Driving on tight roads or on uneven roads.  


Why does the vehicle not come back toward the middle of the lane, as expected, in the Aid or Aid + Alert mode?  
High cross winds are present.  
There is a large road crown.  
Rough roads, grooves or shoulder drop-offs.  
Heavy uneven loading of the vehicle or improper tire inflation pressure.  
The tires have been changed, or the suspension has been modified.  

Owner's Manual Feedback

  • Please note that Ford will not respond to individual feedback.
  • Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
  • Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual. 

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

Ok