WARNING   WARNING:  Switch the lamps and the ignition off. Failure to do so could result in serious personal injury.
WARNING   WARNING:  Lamps and associated components become hot when in use. Let them cool down before you remove them.

Image Shown Without Description
  1. Use a suitable tool, for example a small flat blade screwdriver, to carefully raise the center pin and then remove the trim clip.
  1. Remove the screws that secure the lamp assembly.
Image Shown Without Description
  1. Carefully lift the rear of the headlamp up to disengage it from the lower fixing point.
  1. Remove the headlamp.
Note:   Take care when removing the lamp. There are rupture points adjacent to the headlamp securing screws that are designed to separate under impact.
  1. Disconnect the electrical connector.
  1. To install, reverse the removal procedure.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok