Use oil and fluid that meets the defined specification and viscosity grade.
If you do not use oil and fluid that meets the defined specification and viscosity grade, it could result in:
- Component damage not covered by the vehicle Warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Reduced brake performance.
Engine
Engine Oil
Capacities
Variant
| Including the Oil Filter
| Excluding the Oil Filter
|
---|
All.
| 5.05 L (1.1 gal) | 4.55 L (1.0 gal) |
Note:
The quantity of engine oil required to raise the indicated level on the dipstick from minimum to maximum is
0.7 L (0.2 gal).
Materials
Name | Specification |
---|
Ford-Castrol Magnatec | WSS-M2C948-B
|
Engine Oil Top-Up
If you are unable to find engine oil that meets the specification defined by WSS-M2C948-B, you can top-up with a SAE 5W-20 engine oil that is defined by ACEA A5/B5.
Note:
Do not use more than
0.5 L (0.1 gal) of the alternative engine oil between scheduled service intervals.
Engine Coolant
Capacities
Variant
| Quantity
|
---|
Vehicles with manual transmission.
| 5.55 L (1.2 gal) |
Vehicles with automatic transmission.
| 5.8 L (1.3 gal) |
Materials
Name | Specification |
---|
Antifreeze Super Plus Premium FU7J-19544-xx | WSS-M97B44-D
|
Fuel Tank
Capacities
Variant
| Quantity
|
---|
All.
| 52 L (11.4 gal) |
Washer Reservoir
Capacities
Variant
| Quantity
|
---|
Vehicles without headlamp washers.
| 4.2 L (0.9 gal) |
Vehicles with headlamp washers.
| 5.8 L (1.3 gal) |
Materials
Name | Specification |
---|
Screen Wash FU7J-19C544-AA/BA/DA/EA/GA/HA | WSS-M14P19-A
|
Brake System
Materials
Name | Specification |
---|
Brake Fluid DOT 4 LV High Performance BU7J-M6C65-xxxx | WSS-M6C65-A2
|